Global
- Home >
- Products >
- Computing Products >
- Servers >
- UNIX Servers PRIMEPOWER >
- Bundled Software
Server System Manager - Bundled Software
Standardized Server Management Software for Fujitsu server families PRIMEQUEST, PRIMERGY, SPARC Enterprise and PRIMEPOWER
Server System Manager is common server management software for mission-critical IA server PRIMEQUEST, PRIMERGY PC server and SPARC Enterprise/PRIMEPOWER UNIX servers.
Server System Manager provides graphical server management views and functions for hardware configuration and hardware monitoring in a heterogeneous server environment.
Only one management console is now needed to monitor the whole system and pin-point server environment problems. Administration is simplified and workload reduced as all failures can be easily identified from the highlighted displayed view.
In combination with Systemwalker integrated system management software, Server System Manager provides you total system control and operational stability that includes storage and network as well as servers.
Main Functions
Multiple server configuration view on a single screen
You can monitor multiple server status and control server power from a single screen. All server configurations are viewed in a single tree structure with a common format for greater simplicity.
This lets you check component status of all servers at a glance. All servers are also operated using the same commands, even in a heterogeneous server environment.
You can check automatically created server configuration data in CSV format. The CSV document format makes it easy to display and manipulate the configuration data.
In models with partitioning features such as PRIMEQUEST, SPARC Enterprise and PRIMEPOWER you can also monitor the quantity and status of server resources such as CPU, memory and PCI slots in each partition.
Swift identification of all failures using event monitoring
All failures are notified to the monitoring screen and can be on-sent to alternative destinations via e-mail.
Flashing signals on the top right of the monitor screen let you swiftly locate failures. Plus with all information displayed on screen you can also identify the problem location within the target server.
As well as via e-mail, failures can also be transmitted to other applications through system management protocol (SNMP trap).
Flexible configuration allows different destinations to be notified of specific server and event types. This ensures that complex system problems and changes are sent to the right person, enabling the fastest and most accurate action to be taken.
Remote hardware operation
Power on/off operations can be performed from a management PC at a remote location.
Hardware location view
You are able to check all server assets. All information needed for server asset management is collected by Server System Manager. You can also check each server’s position within a rack using the rack layout image and the associated equipment using the server image.
Linked to hardware specific management functions
Server System Manager integrates the platform specific management functions of PRIMEQUEST and PRIMERGY. Such platform specific functions are then accessed from Server System Manager for even more efficient centralized management.
Function List
Monitoring functions
| Functions | PRIMEQUEST | PRIMERGY | SPARC Enterprise PRIMEPOWER |
|
|---|---|---|---|---|
| Server Status | Monitoring of operational server status | YES | YES | YES |
| Server Configuration | Server component view (tree structured format) | YES | YES | YES |
| Failure Identification | Failed part view of server component | YES | YES | YES |
| Resource Utilization | Workload view of CPU and memory | - | - | YES |
| Location View | Location view of registered equipment | YES | YES | YES |
Operational functions
| Functions | PRIMEQUEST | PRIMERGY | SPARC Enterprise PRIMEPOWER |
|
|---|---|---|---|---|
| Power-On | Power-on server and start OS | YES | YES (*2) | YES (*2) |
| Power-Off | Power-off after OS shutdown | YES | YES (*2) | YES |
| Forcible Power-Off | Forced power off without OS shutdown | YES (*1) | YES (*2) | YES (*2) |
| Rebooting | Server restart after OS shutdown | YES | YES (*2) | YES |
| Forcible Rebooting | Restarts server without OS shutdown | YES (*1) | YES (*2) | - |
| Dynamic Reconfiguration | Replace system board in a partition during system operation | - | - | YES(*2) |
| Zone management view | Solaris 10™ Operating System's zone management and resource pool management | - | - | YES(*3) |
*1 Only for Linux system.
*2 There are not available functional sets of each models. Refer to supported model list below.
*3 Using only Solaris™ 10 OS.
Supported model list
| Platform | Models | Note |
|---|---|---|
| PRIMEQUEST | PRIMEQUEST 520, 540, 580, 420, 440, 480 | |
| PRIMERGY | PRIMERGY RX100 S3, RX100 S4, RX200 S2, RX200 S3, RX300 S2, RX300 S3, TX120, TX150 S4, TX150 S5, TX200 S2, TX200 S3, BX600, BX620 S2, BX620 S3, BX620 S4 | |
| PRIMERGY RX600 S2 | Only power-on and forcible reboot are available. | |
| PRIMERGY RX600 S3, PRIMERGY RX600 S3(SAS) | Only power-on, forcible reboot and forcible power-off are available. | |
| PRIMERGY TX200FT S2, TX200FT S3, TX150FT S4 | Operational functions are not available. | |
| SPARC Enterprise PRIMEPOWER |
SPARC Enterprise T1000, T2000, T5120, T5220 PRIMEPOWER 1, 100, 200, 250, 400, 450, 600, 650, 850 |
Only power-off and reboot are available. |
| SPARC Enterprise M4000, M5000, M8000, M9000 PRIMEPOWER 800, 900, 1000, 1500, 2000, 2500 |
Enhancement History
V 1.2.3
- Support function for coexistence with ETERNUS SF Storage Cruiser added
Installation of Solaris Manager on the same management server is allowed only when the version of ETERNUS SF Storage Cruiser is 13.2 or later. (For the agent functionality, if the version of ETERNUS SF Storage Cruiser is 13.1 or later, both products can be installed on the same managed server node regardless of the version of Server System Manager.)
V1.2.2
- Support function for PRIMERGY RX600 S3(SAS), BX620 S3, SPARC Enterprise T5120, T5220 added
V 1.2.1
- Support function for PRIMERGY RX100 S4, RX200 S3, RX300 S3, RX600 S3, TX120, TX150 S5, TX200 S3, BX620 S3, SPARC Enterprise T1000, T2000, M4000, M5000, M8000, M9000 added
- New functions added (Zone management view for SPARC Enterprise and PRIMEPOWER)
V 1.1.2
- Support function for PRIMEQUEST 520,540 and 580 added
V 1.1.1
- Support functions for PRIMERGY RX100 S3, TX150 S4,
PRIMEQUEST 420 added - PRIMEQUEST manager functions supported
(only for PRIMEQUEST management) - New functions added
- Equipment location view (Location view and Rack view)
- System status notification
- Server configuration documentation
- System log (only for PRIMEPOWER)
- Partition configuration change (Dynamic Reconfiguration)
( only for PRIMEPOWER)
V 1.0.1
- Support functions for PRIMERGY RX600 S2, BX620 S2,
PRIMEQUEST 440,480 added - Enhanced for English environment
V 1
- First release
System Configuration Example
- Server System Manager agent software needs to be installed on the managed servers. ( PRIMEQUEST, PRIMERGY, SPARC Enterprise and PRIMEPOWER)
- Server System Manager management software needs to be installed on operational management server.
- Server System Manager client software needs to be installed on the management client.
- SPARC Enterprise, PRIMEPOWER or PRIMERGY can be the operational management server if managed servers are only PRIMEPOWER and SPARC Enterprise.
- PRIMERGY can be the operational management server if managed servers are only PRIMEQUEST.
- PRIMERGY can only be the operational management server in order to manage under heterogeneous server environment or managed servers are only PRIMERGY.
Downloads
Confirm the operating environment before download and installation of this software.
