ETERNUS SMI-S Server
This product offers you the interface base on the SMI-S (Storage Management Initiative - Specification) to connect an ETERNUS Storage Systems. Download is free.
The ETERNUS SMI-S Server supports the following products:
| Disk storage systems | v2.1.1.0 |
ETERNUS DX410/DX440
ETERNUS DX8100/DX8400/DX8700 ETERNUS4000 model 400, model 600 (Firmware version V20L41 or later) ETERNUS8000 model 800, model 1200, model 2200 (Firmware version V20L41 or later) |
|---|---|---|
| v3.0.1.0 | ETERNUS DX8700 S2 | |
| Operating systems | v2.1.1.0 |
Microsoft Windows Server 2003, Standard Edition Service Pack 2
Microsoft Windows Server 2003, Enterprise Edition Service Pack 2 Microsoft Windows Server 2008, Standard Edition Microsoft Windows Server 2008, Enterprise Edition |
SMI-S agent function is build in the following products and the function provides you the SMI-S server interface. No need to install the program of this page.
-ETERNUS DX80/DX90
-ETERNUS DX S2 series
-ETERNUS DX S3 series
For use of ETERNUS SMI-S Server, Fujitsu requires that you agree with the following "Conditions of use".
Using this software means the following conditions are agreed, so please desist from downloading if you don't agree.
Conditions of use
Please ensure that the following usage conditions are met when using this software.
Please do not use this software if you cannot observe these use conditions.
-
This software can be used only with the above target model(s).
-
This software cannot be redistributed.
-
You may not reverse engineer, decompile or disassemble the software.
-
Any copyright mark concerning this software may not be revoked.
-
Any damage occurring following use of this software is at your own risk, Fujitsu will not assume any responsibility for operational problems.
