Use the following calculator to estimate the power consumption for ETERNUS AF/DX based on your use of each option. You can then use these results as a better guide when calculating the running cost of your system.
Please be aware that the results provided by this calculator are still only an estimate. They may not always provide the same value as that obtained in actual operational system environments.

How to use

Select the component items to be use and then click "Process power consumption calculation" button.The usage hours/day of Eco-mode operation can be selected at "Comparison of daily power consumption" section.

Model
Enclosure
Controller
Host interface Fibre channel
Fibre channel (32 Gbit/s)
iSCSI (10 Gbit/s)
iSCSI
FCoE
SAS
Unified (10 Gbit/s)
Unified
Cache memory
Disk drives / SSDs Number of disk drives (*1) Eco-mode (*2) applied
2.5 inch
900GB/15krpm SAS
600GB/15krpm SAS
300GB/15krpm SAS
2.4TB/10krpm SAS
1.8TB/10krpm SAS
1.2TB/10krpm SAS
900GB/10krpm SAS
600GB/10krpm SAS
450GB/10krpm SAS
300GB/10krpm SAS
2TB Nearline
1TB Nearline
30.72TB SSD
15.36TB SSD
7.68TB SSD
3.84TB SSD
1.92TB SSD
1.6TB SSD
960GB SSD
800GB SSD
400GB SSD
200GB SSD
100GB SSD
Sub-total 0
3.5 inch
2.4TB SAS
1.8TB SAS
1.2TB SAS
900GB SAS
600GB SAS
450GB SAS
300GB SAS
14TB Nearline
12TB Nearline
10TB Nearline
8TB Nearline
6TB Nearline
4TB Nearline
3TB Nearline
2TB Nearline
1TB Nearline
3.84TB SSD
1.92TB SSD
1.6TB SSD
960GB SSD
800GB SSD
400GB SSD
200GB SSD
100GB SSD
Sub-total 0
Overall Total 0

*Note 1: Maximum number of disk drives can be supported is listed on Specifications of respective product.
*Note 2: The Eco-mode function reduces power consumption by spinning-down disks during certain periods. (more details)

Calculation results

Power consumption In normal operation 0 kW
In idle state 0 kW
In Eco-mode operation 0 kW
Heat Generation In normal operation 0 kJ/h
In idle state 0 kJ/h
In Eco-mode operation 0 kJ/h
Weight 0 kg

Comparison of daily power consumption

Duration of Eco-mode operation hours / day
Daily power consumption In normal operation 0 kWh
In Eco-mode operation 0 kWh
Ratio 0 %
  • The results are calculated based on measurement values observed under specific conditions, and so may differ from actual values under different conditions and environments.
  • Data provided by this tool may change without notice.
  • Fujitsu shall not accept any liability for any direct or indirect damage or loss arising out of or relating to use of this tool.

Last updated: August 5, 2019