VMware Multi-Pathing plug-in for ETERNUS Download
VMware Multi-Pathing plug-in for ETERNUS (hereinafter referred to as "this software") is designed as a Storage Array Type Plugin (SATP) for ETERNUS AF/ETERNUS DX.
In the event of a path failure SATP automatically switches paths in conjunction with VMware standard Native Multipathing Plugin (NMP) with its failover capacity.
Using this software, ETERNUS path failover function is reinforced much further than the standard VMware SATP, and it enables continuous access even during a path failure and improves the reliability of the system.
Requirements for hardware and software are listed below.
VMware vSphere 7.0 Standard
VMware vSphere 7.0 Enterprise Plus
VMware vSphere 6.7 Standard
VMware vSphere 6.7 Enterprise Plus
VMware vSphere 6.5 Standard
VMware vSphere 6.5 Enterprise Plus
VMware vSphere 6.0 Enterprise
VMware vSphere 6.0 Enterprise Plus
VMware vSphere 5.5 Enterprise
VMware vSphere 5.5 Enterprise Plus
|Supported Storages||All-Flash Arrays||
ETERNUS AF150 S3[*1]
ETERNUS AF250 S3[*1]/AF250 S2/AF250
ETERNUS AF650 S3[*1]/AF650 S2/AF650
Hybrid Storage Systems
Disk Storage Systems
ETERNUS DX60 S5[*1]/S4/S3
ETERNUS DX100 S5[*1]/S4/S3, DX200 S5[*1]/S4/S3
ETERNUS DX500 S5[*1]/S4/S3, DX600 S5[*1]/S4/S3
ETERNUS DX900 S5[*1]
ETERNUS DX8900 S4[*1], DX8700 S3, DX8900 S3
ETERNUS DX60 S2
ETERNUS DX80 S2
ETERNUS DX90 S2
ETERNUS DX400 S2
ETERNUS DX8000 S2
- Supported on VMware vSphere 6.5/6.7/7.0
How to download and install
For use of this software, please contact with FUJITSU sales representativ
For information on installing, program settings and use, refer to the software information.
|Version||File name||File size|
|1.3.0||Software Information/ VMware Multi-Pathing plug-in for ETERNUS