FUJITSU PSWITCH 4032P
FUJITSU PSWITCH 4032P
- 1U low-latency, Layer 2/3, Ethernet switch
- Ideal platform for traditional ToR as well as Spine/Aggregation switch deployments
- 40 Gbit/s Ethernet Switch, Layer2 switching support / Layer3 Service support, End Host Mode (EHM)
- 32x 40GbE QSFP+ ports
- Support of advanced features such as DCB, EVB and VTEP
|
|
|
|
High-performance and Availability |
Auto Discovery |
End Host Mode (EHM) |
Data Center and Virtualization |
|
Enable the efficiency and flexibility you need to support cloud computing, virtualization, mobility, and consolidation. |
Reduce the initial effort of introducing the switch into network. |
Establish a set of secured ports to be connected to the network without any considerations about STP, VLAN, load balancing, or other settings. |
Deliver key scalable features that meet the demands of today’s virtualized and cloud multi-vendor environments. |
-
High-performance and Availability
Enable the efficiency and flexibility you need to support cloud computing, virtualization, mobility, and consolidation. -
Auto Discovery
Reduce the initial effort of introducing the switch into network. -
End Host Mode (EHM)
Establish a set of secured ports to be connected to the network without any considerations about STP, VLAN, load balancing, or other settings. -
Data Center and Virtualization
Deliver key scalable features that meet the demands of today’s virtualized and cloud multi-vendor environments.
Product Video
Tech Specs
| Connection type |
Ethernet ToR Switch 40 Gbit/s Ethernet Switch, Layer2 switching support / Layer3 Service support, End Host Mode (EHM) |
| Up-link ports |
32 x 40 Gbit/s Eth (QSFP+) |
| Management ports |
1 x RJ45 Serial Port 1 x 10/100/1000Mbps LAN Port |
| Network protocol and standards compatibility |
IEEE 802.1ab LLDP, IEEE 802.1d Spanning Tree Protocol, IEEE 802.1p Class of Service, IEEE 802.1Qau Congestion Notification, IEEE 802.1Qaz Enhanced Transmission Selection (ETS), IEEE 802.1Qbb Priority Flow Control (PFC), IEEE 802.1q VLAN, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1v Protocol VLAN, Port VLAN, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1x Port Based Network Access Control, IEEE 802.3x Flow Control, IEEE DCBX Data Center Bridging Exchange protocol proposal for 802.1 Qaz, IPv4, IPv6 and mixed IPv4/IPv6 network protocols, IEEE 802.1ax-2008 Link Aggregation |
| Management |
Telnet/SSH Network Configuration Protocol(NETCONF) Simple Network Management Protocol(SNMP) Remote Monitoring(RMON) Open vSwitch Database(OVSDB) management protocol |
| Link aggregation |
Static LAG IEEE 802.1ax-2008 standard (LACP) support up to 32 ports in a LAG virtual port channels (VPCs) |
| Performance |
1280Gbps switching bandwidth (2560Gbps duplex) Automatic address learning function to build the packet-forwarding information table. The table contains up to 96K MAC addresses 12 MB of packet buffer memory Support Jumbo Frame up to 9198 bytes Alternate Store-Forward (ASF) mode - Cut-through is available to minimize the latency Latency x‹ 1 microsecond (64-byte packets) |
| Spanning tree |
Spanning Tree Protocol (STP) Rapid Spanning Tree Protocol (RSTP) Multiple Spanning Tree Protocol (MSTP) |
| VLAN |
Port Based VLAN MAC Based VLAN Protocol Based VLAN IP Subnet Based VLAN Private VLAN |
| Power supply configuration |
2 |
| Active power (max. configuration) |
210 W |
| Weight |
8.8 kg |
| Service Weblink |
http://www.fujitsu.com/fts/services |
| Support Pack Options |
Available in major business areas: 9x5, Next Business Day Onsite Response Time 9x5, 4h Onsite Response Time (depending on country) 24x7, 4h Onsite Response Time (depending on country) |
Recommended Service | 24x7, Onsite Response Time: 4h |
| Support Pack Options |
Available in major business areas: 9x5, Next Business Day Onsite Response Time 9x5, 4h Onsite Response Time (depending on country) 24x7, 4h Onsite Response Time (depending on country) |
| Recommended Service | 24x7, Onsite Response Time: 4h |