Skip to main content



Fujitsu gør op med langsomme svartider i nyt storage-system

Munchen, November 05, 2013
Fujitsu lancerer i dag en ny generation af ETERNUS DX-disksystemerne. Lanceringen sker på Fujitsu Forum 2013, der foregår i de kommende dage i München. Fujitsu Forum er Europas største it-event afholdt af en enkelt leverandør; sidste år deltog flere end 12.000 kunder i München. 
De nye storage-systemer gør det nemmere at håndtere de hurtigt voksende datamængder, og løsningen løser virksomhedernes behov for hurtig og fleksibel adgang til data, samtidigt med at der leveres et højere serviceniveau med lavere omkostninger. 
Den nye løsning er en teknologisk landvinding, og for første gang er det muligt at udnytte op til 90 procent af storage-systemet. Dermed gøres der op med myten om, at storage-systemers kapacitet ikke må overstige 50 procent af frygt for langsomme svartider. 

De nye ETERNUS DX-systemer er brancheførende i performance. Systemerne kører med fem gange hurtigere Input/Output Operations Per Second (IOPS), tre gange støre båndbredde end tidligere hurtige systemer. ETERNUS DX S3 systemerne er ligeledes først i markedet med SAS III på backplane, dvs. 12 MB/sec, eller dobbelt så hurtigt som andre markedsledende producenter..
Alle nye ETERNUS DX-systemer kan konfigureres som Unified Storage systemer med smidig integration til block, file, SAN og NAS. 

Læs mere i nedenstående engelske pressemeddelelse. 

Fujitsu Redefines Storage, Puts Business Priorities Ahead with New Generation ETERNUS DX Disk Systems

News facts: 

  • Revolutionary performance architecture delivers fivefold increase in performance, boosting system utilization up to 90 percent
  • Automated quality of service management aligns storage performance with business priorities
  • Seamlessly integrated block/file access enhance consolidation capabilities
Fujitsu today introduces a new era of business-centric storage, with new-generation ETERNUS DX systems that are the industry’s first to put business priorities ahead of storage, easing IT challenges such as the management of ever increasing volumes of critical data. This announcement is made at Fujitsu Forum 2013, Europe’s biggest single-vendor IT event. With its new-generation ETERNUS DX S3 disk storage arrays and latest release of the ETERNUS SF V16 system management software, Fujitsu is delivering business-centric systems that are completely flexible and adaptable to users’ business priorities, instead of allowing the technology to rule over its users.

New ETERNUS DX disk systems enable storage professionals to seamlessly adapt to the needs of their users, and deliver better service levels at lower costs. These benefits are a result of a combination of advances, including a fivefold improvement in performance and intelligent data priority management, meaning that the systems themselves are able to shape backup according to business priorities. Across the range, the scalable entry-level ETERNUS DX100 S3 and DX200 S3 models and the midrange ETERNUS DX500 S3 and DX600 S3 models provide unmatched support for data consolidation projects thanks to seamlessly integrated unified NAS and SAN connectivity. 

For the first time, Fujitsu is enabling storage professionals to boost system utilization up to 90 percent, breaking with conventional storage wisdom that system capacity should not exceed 50 percent to avoid slow system response times.

Combining significantly increased performance with business-centric, automated quality-of service management, the new Fujitsu ETERNUS DX systems also deliver industry-leading performance, running at five times the IOPS, three times the bandwidth and double the bus performance of previous models. The entire ETERNUS DX line-up is based on the latest Intel multicore processors, featuring optimized multiprocessing and threading capabilities, bigger caches and additional flash caches, the latest SAS3 drive interfaces and 16 GB Fibre Channel connectivity.

A new automated quality of service management means that storage professionals no longer need to perform complex and costly tuning to set required response time for high-priority applications. This increases operational efficiency and enables storage professionals to more easily maintain critical service levels.

Unified storage, seamless integrated block and file access

All new ETERNUS DX systems can be configured as unified storage systems with seamless integrated block and file, and SAN and NAS capabilities. In a major difference from simple gateway architectures, this unified functionality is seamlessly integrated within storage controllers, resulting in a consistent user experience, and providing the ability to share all high availability and failover functionalities for SAN and NAS operations across storage controllers.

Fujitsu is also publishing a roadmap confirming upgrades that will introduce further new functionality as well as boosting performance, efficiency, utilization and business continuity capabilities. Enhancements include the transparent failover of ETERNUS DX systems across model classes, dramatically accelerated data rebuild for failed disks, better disk utilization through data compression and deduplication and the introduction of InfiniBand connectivity.

All ETERNUS DX S3 systems are easier to manage and share the same flexible family architecture, providing investment protection and offering extensive scalability, thanks to the ability to seamlessly upgrade to bigger models within the range. In addition, the latest release of ETERNUS SF software introduces new system management functionality for customers with current Fujitsu ETERNUS DX S2 systems.

Supporting quotes

Rachel Dines and Stephanie Balaouras, Research Analysts at Forrester Research, in the Forrester report, Build The Always-On, Always-Available Extended Enterprise (8/12)
“In today's world of 24x7x365 global operations and competition, downtime results not only in immediate lost revenue and productivity, but also in lasting damage to corporate reputation that erodes customer confidence in your brand. Enterprises today must be always on and always available to an extended network of customers, employees, and partners.”

Hiroaki Kondo, Corporate Vice President and Head of Storage Systems Business Unit, Fujitsu Limited
“With the new ETERNUS family, Fujitsu demonstrates a customer-centric philosophy with new business-centric storage, with fresh thinking that not only delivers enormous improvements in system utilization but also the industry’s most flexible systems that adapt to users’ business priorities.”

Pricing and Availability

The full line-up of ETERNUS DX S3 systems and ETERNUS SF16 management software are generally available from December 16, 2013.

Online resources

About Fujitsu

Fujitsu is the leading Japanese information and communication technology (ICT) company offering a full range of technology products, solutions and services. Approximately 155,000 Fujitsu people support customers in more than 100 countries. We use our experience and the power of ICT to shape the future of society with our customers. Fujitsu Limited (TSE: 6702) reported consolidated revenues of 4.5 trillion yen (US$40 billion) for the fiscal year ended March 31, 2017. For more information, please see

All other company or product names mentioned herein are trademarks or registered trademarks of their respective owners. Information provided in this press release is accurate at time of publication and is subject to change without advance notice.

Erik Roesgaard

Telefon: Telefon: +45 5083 6136
E-mail: E-mail:
Product Manager Storage, Fujitsu Danmark

Date: 05 November, 2013
City: Munchen