Specifications | Configuration |
MHY2 BH Series Catalog
- MHY2040BH : 40GB
- MHY2060BH : 60GB
- MHY2080BH : 80GB
- MHY2100BH : 100GB
- MHY2120BH : 120GB
- MHY2160BH : 160GB
- MHY2200BH : 200GB
- MHY2250BH : 250GB
One gigabyte (GB) = one billion bytes(2)
FEATURES
- Broad capacity lineup: 250GB, 200GB, 160GB, 120GB, 100GB, 80GB, 60GB,40GB.
- Suitable for laptop PCs and external HDDs.
Specifications
FUNCTIONAL SPECIFICATIONS
| Sector Length | 512bytes | ||
|---|---|---|---|
| Rotational Speed | 5,400min-1 (5,400rpm) | ||
| Average Latency Time | 5.56ms (typical) | ||
| Seek Time | Read | 12ms (typical) | |
| Write | 14ms (typical) | ||
| Physical Dimensions |
Width | 70.0mm | |
| Depth | 100.0mm | ||
| Height | 9.5mm | ||
| Weight | 101g or less | ||
| Interface | ATA-8, SATA 2.5 (1.5Gb/s) | ||
| Power Consumption |
Spin Up | 5.0W (maximum) | |
| Read, Write | 1.9W (typical) | ||
| Idle | 0.60W (typical) [Slumber mode] | ||
| Standby | 0.13W (typical) [Slumber mode] | ||
| Sleep | 0.13W (typical) [Slumber mode] | ||
| Energy Efficiency (3) | MHY2040BH | 0.0150W/GB (d Rank) | |
| MHY2060BH | 0.0100W/GB (d Rank) | ||
| MHY2080BH | 0.00750W/GB (d Rank) | ||
| MHY2100BH | 0.00600W/GB (d Rank) | ||
| MHY2120BH | 0.00500W/GB (d Rank) | ||
| MHY2160BH | 0.00375W/GB (e Rank) | ||
| MHY2200BH | 0.00300W/GB (e Rank) | ||
| MHY2250BH | 0.00240W/GB (e Rank) | ||
| Data Transfer Rate | 150MB/s (maximum) | ||
| Buffer size (4) | 8MB | ||
Acoustic Noise(1) |
2.4bels (Idle) |
||
ENVIRONMENTAL SPECIFICATIONS
| Ambient Temperature(5) |
Operating | 5ºC to 55ºC (ambient), 5ºC to 60ºC (disk enclosure surface) |
|---|---|---|
| Non-operating | -40ºC to 65ºC | |
| Gradient | 20ºC/h or less | |
| Relative Humidity |
Operating | 8% to 90% RH (non-condensing) |
| Non-operating | 5% to 95% RH (non-condensing) | |
| Maximum wet bulb | 29ºC (operating), 40ºC (non-operating) | |
| Vibration | Operating | 9.8m/s2 (1.0G) [5Hz to 500Hz] |
| Non-operating | 49m/s2 (5.0G) [5Hz to 500Hz] | |
| Shock | Operating | 3,185m/s2 (325G) [duration 2ms] |
| Non-operating | 8,820m/s2 (900G) [duration 1ms] | |
| Altitude | Operating | -300m to 3,000m |
| Non-operating | -300m to 12,000m | |
| Power requirements |
+5V±5% |
|
Specifications are subject to change without notice.
- 1 bels:
- 1bels=10dB. Unit: sound pressure level.
- 2 GB:
- One gigabyte (GB) = one billion bytes; accessible capacity will be less and actual capacity depends on the operating environment and formatting.
- 3 Rank:
- Energy efficiency based on the Law Concerning the Rational Use of Energy indicates the value obtained by dividing power consumption by the storage capacity (Japan only).
- 4 MB:
- One megabyte (MB) as 1,048,576 bytes for Hard Disk Drives' cache size.
Small portion of buffer memory is used for drive firmware control. - 5 ºC:
- degree C.
