Skip to main content


United States

Archived content

NOTE: this is an archived page and the content is likely to be out of date.

V535 With Integrated F-Pro

FUJITSU Tablet STYLISTIC V535 Industrial and FUJITSU Biometric Authentication PalmSecure® F-Pro Sensor

The FUJITSU V535 Tablet and PalmSecure-F Pro sensor integrated into a ruggedized carrier, provides powerful computing with reliable, market-proven, biometric authentication for mobile and countertop configurations in the harshest Financial, Healthcare and Retail operating environments. Thanks to a water and dust resistant yet lightweight design, combined with a 8.3” PCAP touchscreen display with toughened glass, WLAN, Bluetooth and NFC communications, and over 5-hours Lithium battery runtime, the V535 tablet lets you stay connected from anywhere at any time.

Palm Enrollment
         Palm Enrollment
Palm Check in
          Palm Check in
Palm Mobile
             Palm Mobile

  Datasheet (517 KB)
        Model                                                           V535 Tablet
Operating systems preinstalled Windows 10 IoT Enterprise LTSB (64 bit); Win10 is lite version that does not include MS Office applications
Hard disk 64 GB Solid state hard drive
Multimedia Camera Front camera 2.0 megapixel, rear camera 8.0 megapixel with autofocus and light
Base Unit
General System Information Processor Intel® Atom™ Processor Z73795 (up to 2.39 GHz, 2M Cache)
Chipset Intel® BayTrail SoC
Memory 4GM memory
Integrated WLAN WLAN 802.11 a/b/g/n
BIOS features BIOS Flash EPROM
Unified Extensible Firmware Interface (UEFI)
Audio features 2x internal microphones, 2x built-in speakers (stereo)
Dust resistant IPX5
Water resistant IP6X
Drop resistant up to 1.2 m (with rugged frame)
Display 8.3 inches (21.0 cm) Multi-Touch, Projected Capacitive Touchscreen, IPS, (WUXGA), Glare, 1,920 x 1,200 pixel, 800:1, 400 cd/m2
Display notes Toughened glass
Sensors 3-axis Accelerometer Compass
Ambient Light Sensor
Aspect ratio 16:10
Brightness - typical 400 cd/m2
Contrast - typical 800:01:00
Digitizer Multi-touch up to 10 fingers, passive pen supported (not included)
Ambient light sensor Integrated
Ambient light sensor notes While enabled, the ambient light sensor automatically adjusts the display backlight
Viewing angle (h/v) - typical 160°/160°
Base unit STYLISTIC V535
Interface Internal microphones 2 (digital)
Wireless technologies Antennas 2x dual band WLAN/BT, 1x NFC for dedicated module
Bluetooth® Bluetooth 4.0
Integrated WLAN WLAN 802.11 a/b/g/n
GPS notes Including GPS functionality A GPS application that supports Windows Sensor and Location APIs must be purchased separately.
NFC Integrated Near Field Communication
Power supply AC adapter 5V DC, (2A)
Rated voltage range 100 V - 240 V (AC Input)
Rated frequency range 50 Hz - 60 Hz
1st battery Lithium polymer battery 2-cell, 16.8 Wh, 4425 mAh
Runtime 1st battery2 Over 5 hours
Battery notes Battery runtime information is based on worldwide acknowledged BAPCo® MobileMark® 2012 Lite Office Productivity Workload and MobileMark 2012 Office Productivity Workload bench mark testing which provides results that enable direct product comparisons between manufacturers. It does not guarantee any specific battery runtime which actually can be lower and may vary depending on product model, configuration, application and power management settings. The battery capacity slightly decreases with every charging cycle and over the lifetime.
Weight & Environmental Weight (lbs) 1.19 lbs.
Product STYLISTIC V535 Industrial
Global IT-Eco-Declaration
RoHS (Restriction of hazardous substances)
WEEE (Waste electrical and electronic equipment)
Power supply Cable 10W5V AC Power Charger Cable
Manageability Manageability technology PXE boot supported (only in Windows Server® 2012 / 2012 R2 environment due to EFI x86 support)
Security System and BIOS Security Trusted platform module (TPM 2.0)
User Security BIOS security
User and supervisor BIOS password
Model                 Sensor                                      FUJITSU PalmSecure-F-Pro
Reading system Reading by near-infrared light
Scope of capture Entire palm
Capturing distance 40 to 60mm (Enrollment)
35 to 70mm (Authentication)
Dimensions Width 29 x Depth 29 x Height 13mm
Weight Below 12 g
Voltage of Power supply 4.4 to 5.4 V
Current consumption 500 mA (Max at normal-power mode) 900 mA (Max at high-power mode)
Power saving mode 50 mA (Max)
Power consumption 2.5 W (Max at normal-power mode)
4.5 W (Max at high-power mode)
Power source Provided by the USB Interface cable
Host interface Cable Length included 1 m
Max length supported is 4 m
Interface connector Series "Micro-B" plug (with 5 pins)
Installation environment Installation angle Full direction
Temperature -40 to 85 degrees Celsius
Humidity 20 to 90%RH
Material of the surface of Sensor unit Glass
Encryption method AES (Length of cryptography key more than 128 bit)
Authentication rate FRR: 1.00% (no retry)
FAR: Below 0.00001%
Applicable Standard Electro magnetic wave standard VCCI ClassB, FCC ClassB, EN ClassB
Safety Standard UL60950-1, EN60950-1
Environmental Regulation Conforms to RoHS and WEEE
Warranty 1 Year

Dimensions in mm with Tablet and Sensor integrated in ruggedized carrier.