GTM-WDZTTQ6
Skip to main content
  1. Home >
  2. About Fujitsu >
  3. News & Resources >
  4. News >
  5. Press Releases >
  6. Fujitsu Introduces New Graphics Display Controller for Vehicle Navigation Systems, Best Suited for North American Automotive Market Applications

Fujitsu Introduces New Graphics Display Controller for Vehicle Navigation Systems, Best Suited for North American Automotive Market Applications

New MB86276 Delivers Cost-Effective GDC for 2D Systems in Mid-Range Vehicles

Fujitsu Semiconductor America Inc.

Sunnyvale, CA, February 23, 2006

Fujitsu Microelectronics America, Inc. (FMA) today extended its global leadership in graphics display controllers (GDCs) for automotive applications, introducing a new, cost-efficient version for the mid-range vehicle market in North America.

The Fujitsu MB86276 is a streamlined version of the innovative three-dimensional (3D) graphics display controller, the Fujitsu MB86296, which has been designed into high-end vehicles in Japan and Europe. The new two-dimensional (2D) GDC MB86276 is ideally suited for the mid-range navigation and entertainment market that is now emerging in North America. The MB86276 2D GDC includes many of the special features offered in the high-end 3D device, including dual display support, video capture, multiple alpha-blending options, and a 16-bit Z buffer that enables low-level 3D operations.

“Fujitsu is the leader in 3D graphics display technology for vehicle navigation systems worldwide, with more than 30 percent of the global market. With the new MB86276 2D GDC, we are expanding our controller line to meet the specific price and performance benchmarks of North American vehicle manufacturers,” said Keith Horn, senior vice president, sales and marketing, Fujitsu Microelectronics America. “This version meets the industry’s requirements for navigation systems appropriate for mid-range cars and trucks in the U.S. and Canada.”

The MB86276 2D GDC incorporates the display controller, rendering engine and video-input unit developed originally for the Fujitsu MB96296 3D version, along with built-in alpha-blending, anti-aliasing and chroma-keying capabilities, and an up/down video scalar. An optimized central processor allows more direct CPU connections, so the new 2D GDC can be linked to a wide range of processors and controllers from various manufacturers. All available operating system drivers developed for the Fujitsu 3D GDC family can be used with the 2D GDC with only minimal modification.

The MB86276’s internal and memory frequency is 133MHz; the base clock for display operates at 400.9MHz. Display resolutions range from 320 x 240 to 1280 x 768. Six layers of overlay windows, all of which have a color depth of 8, 16, or 24 bits/pixel, can be used simultaneously, and can be changed in size, position, and priority. The maximum logical layer size is 4096 x 4096 pixels. Specific layers can be blended easily using the alpha map, which can be freely assigned to any of the six layers and which allows the assignment of 8 bits per pixel. Each pixel can be mixed to provide excellent control of transparency levels.

Internal and external DMA is supported, along with an external 32-bit SDRAM interface for up to 64MB of graphics memory. An I2C interface also is included, as are GPIO inputs and outputs.

Dual Display Output Enables Multiple Applications

The MB86276 provides all of the 2D capabilities of the MB9629x 3D GDC, including texture mapping, alpha blending, Gouraud shading, flat shading and the innovative dual-display output. Using the dual-display mode, the GDC can individually drive two connected displays with identical resolution.

The controller can be connected with the displays using either two independent interfaces or just one interface with some multiplexing logic. Therefore, it is possible for the part to support a full range of dual-display applications, such as rear-seat entertainment systems or dual monitor-control units. In dual-display mode, each layer can be programmed to appear in either one or both of the display units, thus making it possible to duplicate the image content or to deliver two individually composed pictures, one on each display.

Pricing and Availability

The MB86276 is manufactured using Fujitsu’s 0.18-micron CMOS technology and is housed in 256-pin Ball Grid Array packages. The controller is available now in volume, with prices starting at $12 each in 100,000-piece quantities. In addition to broadening its product line with the MB86276 to support the requirements of North American automakers, Fujitsu will continue to develop graphics display controllers for the leading edge of the high-end navigation market, with new 3D products set for introduction throughout 2006.

Note to Editors:
Click here to download the Fujitsu MB86276 product fact sheet:
http://www.fujitsu.com/downloads/MICRO/fma/pdf/MB86276.pdf (85 KB)

Click here do download a block diagram of the Fujitsu MB86276:
http://www.fujitsu.com/downloads/MICRO/fma/imagelib/gdc/medres/gdcblockdiagram.jpg (72 KB)

A medium-resolution picture relevant to this press release can be found by following the link:
http://www.fujitsu.com/downloads/MICRO/fma/imagelib/gdc/medres/Lime4_medres.zip (1.70 MB /Lime4 medres.zip)

For a high-resolution download option please follow the link: http://www.fujitsu.com/downloads/MICRO/fma/imagelib/gdc/highres/Lime4_hires.zip (5.96 MB /Lime4 hires.zip)

About Fujitsu Microelectronics America, Inc.

Fujitsu Microelectronics America, Inc. (FMA) leads the industry in innovation. FMA provides high-quality, reliable semiconductor products and services for the networking, communications, automotive, security and other markets throughout North and South America. As a founding and board member of the WiMAX Forum™, Fujitsu supports the standards development and compliance programs that are essential to successful Broadband Wireless deployment. Fujitsu provides performance-driven WiMAX solutions by leveraging the company's experience and expertise in the networking and communications markets. Fujitsu offers flexible WiMAX SoC and reference designs for WiMAX-certifiable systems to equipment vendors. For more product information, please visit the company's web site at http://us.fujitsu.com/micro/WiMAX or please address e-mail to inquiry.bwa@fma.fujitsu.com

Press Contact - FMA

Emi Igarashi

Phone: Phone: 408-737-5647
E-mail: E-mail: eigarash@fma.fujitsu.com
Company:Fujitsu Microelectronics America, Inc.

Date: February 23, 2006
City: Sunnyvale, CA
Company: Fujitsu Microelectronics America, Inc.