Why resistive touch panels are the most adaptive for the medical sector

Feather Touch Long Life

Fujitsu Components Europe

Hoofddorp, January 08, 2021

When it comes to touch panels for medical equipment, there are some obvious requirements.

For instance, medical professionals need the flexibility to use gloves, at any given moment. They may have wet hands or a wet screen but should still be able to operate the touch panel, where the response of the panel should and cannot not be affected.

Medical applications touch panel

Another requirement, also not immediately seen as critical, but just as important.

This is the case of the Electro Magnetic Interference (EMI). You would not want to have any interference on medical equipment, particularly on life critical devices. So a medical device should not emit or not be disturbed by EMI. For this reason the International Electrotechnical Commission put in place the EMI/EMC standards for medical electrical devices. However engineers developing medical systems struggle to meet those standards.

When searching for the “ideal” touch panel to fit in a medical devices, there is a tendency from decision makers to want whatever sounds like the latest technology. For instance, PCAP touch panel might seem the best fit as they are used in today’s most popular consumer devices, the light touch feeling seems ideal. However PCAP touch panels emit EMI and are disturbed by EMI, they require complex tuning to meet EMI expectations.  In contrast resistive panels have an extremely low EMI emission and are not sensitivite to EMI.

On that point of view resistive panels are much more adapted to the medical equipment than PCAP. But this is not the only advantage.

Resistive touch panels react to finger pressure, they are not affected by gloves or water drops. No compromised is needed as they will work in all conditions. On the opposite, capacitive panels have to be tuned to accept glove input, this can make them extremely sensitive, so much that they can even detect a bare finger before it has touched the screen. Making false inputs more likely. PCAP panels also require specific tuning to cope with liquid drops on their surface.

The new “Feather touch –Long life” resistive touch panels from Fujitsu combine the advantages of resistive and capacitive panels in medical applications, while requiring no tunning.

Touch panel

They have the same light touch feeling as capacitive panels, and support image zooming and rotating functionality.

The touch panels are specified to support 10 million inputs, making them the perfect alternative to capacitive panels in the medical field

Fujitsu Components Company Information

Fujitsu Components is a leading manufacturer of relays and offers a full range of relay products. Through its heritage of over 100 years of experience Fujitsu is able to offer high quality relay products and service alike. Fujitsu Components Europe B.V., headquartered in Hoofddorp, The Netherlands is responsible for managing the sales, marketing and distribution in Europe, Middle East and Africa. 
Shaping tomorrow with you

www.fujitsu.com/components -Twitter -LinkedIn

Essiena Uyttenbroek

Diamantlaan 25
2132 WV
The Netherlands

Phone: +31 (0)23 556 0936
E-mail: essiena.uyttenbroek@fceu.fujitsu.com
Company: Fujitsu Components Europe B.V.
Manager, Marketing and Communication

All trademarks or registered trademarks are the property of their respective owners.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Fujitsu Component Limited is under license.

All information including price, specifications, services in this release are current information as of the announcement date. Please be noted that information in this announcement is subject to change without notice.

Date: January 08, 2021
City: Hoofddorp

Top of Page