Skip to main content





  • Fujitsu Asia Launches CentricStor Virtual Tape Appliance Singapore, Singapore, November 18, 2004 - Fujitsu Asia Pte Ltd, a leading regional IT and communications solutions provider, today announced the launch of CentricStor, the world’s first self-contained virtual tape appliance designed to support major system platforms, tape automation platforms and tape devices in heterogeneous environments.



  • Fujitsu Asia Launches fi-5650C Performance Oriented Document Scanner Singapore, Singapore,Malaysia,Indonesia,India,Philippines, September 22, 2004 - The fi-5650C is Fujitsu’s first-ever Automatic Document Feeder (ADF) scanner in this product segment, with a 200-sheet ADF capacity. It captures both sides of a document in a single pass using dual charged coupled device (CCD) arrays. In A4 Portrait mode, it scans colour or monochrome pages at a resolution of 300 dots per inch (dpi), at a speed of 55 pages per minute (ppm) and 110 images per minute (ipm) for single- and double-sided documents respectively. The device comes with universal serial bus (USB) 2.0 – backward compatible with USB 1.1 – as well as Ultra Small Computer System Interface (Ultra SCSI) connections, providing a speedy link to a PC. Its daily scanning cycle is up to 8000 pages per day.


  • Fujitsu Asia Outlines Plans for Singapore and Region Singapore, Singapore,Malaysia, August 05, 2004 - Fujitsu Asia today announced plans to become a key provider of information and communications technology (ICT) solutions for the local and regional markets as the company marks its 30th year of operations in Singapore.



    • Fujitsu Unveils New PRIMEPOWER Server Lineup, World’s First UNIX Servers Using 90nm Technology Singapore, Singapore,Malaysia, June 22, 2004 - Fujitsu Asia Pte Ltd, a leading regional IT & Telecommunications company, today announced the launch of five new high-end and mid-range models in its PRIMEPOWER server lineup. The new lineup incorporates 1.89GHz SPARC64TM V (sparc64-5) processors based on 90nm semiconductor technology for dramatic improvements in performance, and are the world’s first UNIXâ servers built using 90nm semiconductor technology.

    • Fujitsu Asia and SingTel Collaborate to Deliver i-PhoneNet Singapore, Singapore,Malaysia, June 15, 2004 - Fujitsu Asia Pte Ltd announced today that the company has been awarded by SingTel to provide i-PhoneNet, an advanced IP Centrex service that will be delivered over SingTel's reliable network infrastructure. Fujitsu Asia is the system integrator for this project providing network design, installations, training, support and a complete solution for SingTel.

    • Fujitsu Asia Enters a New Era of Transforming Businesses - "The Ubiquitous Way" at CommunicAsia 2004 Singapore, Singapore,Malaysia, June 09, 2004 - Fujitsu Asia, a leading regional IT and telecommunications solutions provider, today announces that it will launch its ubiquitous system solutions at CommunicAsia 2004. These solutions have been designed to meet the challenges of an emerging era of ubiquitous computing and communications.

    • Fujitsu Introduces New 20A Slim Relay for HVAC and Major Appliances Singapore, Singapore,Malaysia,Philippines, June 07, 2004 - Fujitsu Components America, Inc., today released a slim, 20A power relay that is targeted primarily to OEMs developing commercial and industrial products.


    • Fujitsu's New ScanSnap Fi-5110EOX Scanner - For High Performance Digitisation of Paper Documents Singapore, Singapore,Malaysia,Indonesia,India,Philippines, May 31, 2004 - Fujitsu Asia Pte Ltd, a leading regional IT and communications solutions provider, today launched the new ScanSnap Fi-5110EOX - a revolutionary high performance ENERGY STAR® compliant scanner that will make quick work of digitising the largest of documents.

    • Fujitsu Announces Production Schedule and North American Marketing Efforts for Industry’s First Conductive Polymer Film Touch Panels Singapore, Singapore,Malaysia,Philippines, May 25, 2004 - Fujitsu Components Asia, Limited today announced it will begin North American marketing efforts for new resistive touch panels that use an extremely durable conductive polymer film and cost less to produce than conventional resistive touch panels. An industry-first technology developed by Fujitsu Laboratories Ltd. and Fujitsu Component Limited, the custom touch panels will start sampling in early 2006 with production following in Q2 2006.

    • Fujitsu Asia Delivers TRIOLE Strategy For IT Optimization Singapore, Singapore,Malaysia, May 25, 2004 - Fujitsu today outlined the global expansion of its TRIOLE strategy for the optimized design, development and deployment of highly reliable and adaptive business-critical IT infrastructure in heterogeneous environments. Fujitsu Asia will play a key role in bringing products, solutions and services based on the TRIOLE strategy to customers in South East Asia, allowing them to increase business efficiency, agility and continuity.

    • Fujitsu Begins Producing Plastic Touch Panels for Mobile Products Singapore, Singapore,Malaysia,Philippines, May 24, 2004 - Fujitsu Components Asia, Limited today announced the availability of ultra-thin, lightweight, flexible and rigid touch panels for mobile applications. The full-custom touch panels use plastic film substrates to reduce weight, improve durability and provide a wider operating temperature range than traditional film-glass touch panels.

    • Fujitsu Releases X2 Copper Transceiver Module for 10Gbit-CX4 Ethernet Applications Singapore, Singapore,Malaysia,Philippines, May 11, 2004 - Fujitsu Components Asia, Limited, today announced the release of a copper electrical transceiver module compliant with the X2 multi-source agreement (MSA) specification Rev. 1.0b. The X2 x-mGC module transmits 10Gb/s Ethernet over 20m of standard InfiniBand copper cable (AWG24) or VSR parallel optics through a single port, offering a cost-effective, standards-compliant product targeted for multiple applications in 10Gb/s enterprise, storage, and telecom markets. Using the imbedded media detect circuit, transmission up to 300 meters over standard multi-mode can also be achieved using Fujitsu’s o-MGC optical media converter.

    • Fujitsu Introduces Optical Transceiver Module with Media Converter that Provides Low-Cost Support for VSR Parallel Optics in Network/Server Markets Singapore, Singapore,Malaysia,Philippines, May 11, 2004 - Fujitsu Components Asia, Limited, today released a 4-channel optical transceiver module that uses an internal media converter to extend the signal transmission reach of a copper interface up to 300m at 2.5Gb/s or 100m at 3.125Gb/s over multimode fiber (MMF) ribbon cable. Using the Fujitsu optical module, IT managers have the flexibility to implement either a copper or an optical solution using one low-cost copper I/O interface.

    • Fujitsu Brings to Market Copper XENPAK Module for Network/Server Markets Singapore, Singapore,Malaysia,Philippines, May 03, 2004 - Fujitsu Components Asia, Limited today released a copper XENPAK module (xMGC) that conforms to the new 10GBASE-CX4 specification (IEEE 802.03ak/D4.2) for low-cost 10-Gigabit copper Ethernet. The new module reduces the cost per port by offering a low-cost copper solution that has the flexibility to support VSR parallel optics through a single port.


    • Fujitsu Enhances Compact Printer Unit for High-Capacity Kiosk Applications Singapore, Singapore,Malaysia,Philippines, April 26, 2004 - Fujitsu Components Asia, Limited has enhanced its high-capacity thermal printer assembly with more standard features and print capabilities for expanded use in various self-service, informational, and transaction kiosk applications.

    • Fujitsu Expands its 7-Wire Touch Panel Offering Singapore, Singapore,Malaysia,Philippines, April 20, 2004 - Fujitsu Components Asia, Limited today announced it has expanded its 7-wire resistive touch panel offering with the addition of a 17-inch (diagonal) standard product. The company now offers OEMs and VARs a line of standard 7-wire touch panels ranging in size from 8.4 inches to 17 inches.

    • Fujitsu Expands Copper Connector Offering for High-Speed Switching Applications Singapore, Singapore,Malaysia,Philippines, April 05, 2004 - Fujitsu Components Asia, Limited today announced it has expanded its high-speed copper microGiGaCN™ connector series by adding a vertical board-mount I/O socket. The new socket expands Fujitsu’s offering of standard, copper I/O and mid-plane interconnects that comply with InfiniBand®, 10G CX4 Ethernet, and 10G Fiber Channel requirements while meeting the needs of other high-speed applications. For distances less than 20m, the microGiGaCN series provides a low-cost alternative to optical fiber.


    • Fujitsu Releases Semi-Rugged Standalone Printer for Mobile Applications Singapore, Singapore,Malaysia,Philippines, March 30, 2004 - Fujitsu Components Asia today released a semi-rugged, mobile thermal printer unit with a Bluetooth® interface for handheld, portable and wireless applications.

    • Fujitsu Launches World's First 180 Degrees Rotational Scanner Singapore, Singapore,Malaysia,Indonesia,India,Philippines, March 17, 2004 - Fujitsu Asia, a leading regional IT and communications solutions provider today launched the world's first 180 degrees rotational ADF (automatic document feeder) scanner, the fi-5750C. This is the first time, a scanning device incorporates a design that marries functionality with ergonomic and practical style. By equipping the fi-5750C with an ADF that can be turned a full 180 degrees, comfort and convenience are both maximized as the user can easily adapt the scanner to specific space requirements.


    • Fujitsu Asia to Promote Green Procurement Singapore, Singapore,Malaysia, February 10, 2004 - Fujitsu Asia's procurement office announced today to have all newly developed products to be green by March 2004. This achievement has already been met by its parent company, Fujitsu Japan, in March 2003. It underscores the importance Fujitsu placed in environmental protection as a key management priority. A leader in the IT industry, Fujitsu is harnessing its technologies and creativity to contribute to sustainable development.