Fujitsu Expands Fourth-generation Signal Relay Line
Fujitsu Components Asia Pte Ltd
Singapore, March 25, 2002
Fujitsu Components Asia Pte Ltd (FCAL) has enhanced its fourth-generation signal relay series for telecommunications and data networking applications by adding a through-hole version.
The ultraminiature FTR-B3 is a through-hole, flat relay that measures 10.6mm (L) x 7.2mm (W) x 5.2mm (H), enabling increased packaging density in compact equipment. Constructed of heat-resistant materials, the relay withstands both infrared reflow and vapor phase soldering methods.
Featuring a high insulation design that meets Telcordia and FCC standards, the relay has a minimum insulation distance of 1.6mm between coil and contacts, an AC 1.5kV coil contact withstand voltage, and a 2.5kV coil contact withstand surge voltage.
The FTR-B3 uses a high-efficiency, polar electromagnet that results in low, 140mW nominal coil power consumption and contributes to the relay’s compact design. A power saving (100mW) latching-type is also available.
The relay meets IEC61811-55 worldwide European standards and IEC60950/UL1950/EN60950 standards for basic insulation, contact spacing and high breakdown voltage. Its operating temperature is -40 to +85oC.
The FTR-B3 is also available in a surface-mount and reduced surface-mount models. Available immediately, the FTR-B3 series is priced at $2.50 (4.5V coil, non-latching version) each in quantities of ten thousand.
About Fujitsu Components Asia Limited
Fujitsu Components Asia Limited markets and distributes electronic components throughout Asia and Australia. Products include relays, connectors, keyboards, input and pointing devices, and thermal printers.
For more information, please see: www.fcal.fujitsu.com
Press Contact - Fujitsu Components Asia
Address: 102E Pasir Panjang Road, #01-01 Citilink Warehouse Complex Singapore 118529
Phone: (65) 6375 8560
Company:Fujitsu Components Asia Ltd.
All company/product names mentioned may be trademarks or registered trademarks of their respective holders and are used for identification purposes only. Models listed in this press release may not be sold in your country. Please check with your local distributors for availability.
Date: 25 March, 2002
Fujitsu Components Asia Limited