FUJITSU PLAN EP QL41132 2X 10G SFP+
FUJITSU PLAN EP QL41132 2X 10G SFP+
- Powerful 10G Ethernet network adapter with both iWARP and RoCE RDMA
- Compared to other 10GbE solutions, NPAR technology unique to this adapter provides switch-independent network partitioning
- Integrated, advanced networking eliminates I/O bottlenecks and conserves CPU cycles
|
|
|
|
Scalable performance |
Flexible technology support |
Efficient networking |
Connectivity |
|
Delivers full line-rate 10GbE performance across both ports.10G/1G Autonegotiation. Boosts host CPU efficiency with hardware offloads for GRE, NVGRE, and VXLAN tunnels. NPAR is unique to this adapter and allows network partitioning |
Delivers choice and flexibility with concurrent support for RoCE v2 and iWARP technologies; Recommended as a discrete PCIe adapter for scale-up of Fujitsu's default DynamicLoM iWARP adapter capabilities |
Increase VM density and accelerate multitenant networks with full offload for tunneling protocols; iSCSI Boot will be commercially supported once the server UEFI is implemented |
Enables provisioning of 10GbE ports for greater deployment flexibility through switch-independent NIC partitioning, Microsoft Windows Server, VMware ESXi, SLES, and RHEL |
-
Scalable performance
Delivers full line-rate 10GbE performance across both ports.10G/1G Autonegotiation. Boosts host CPU efficiency with hardware offloads for GRE, NVGRE, and VXLAN tunnels. NPAR is unique to this adapter and allows network partitioning -
Flexible technology support
Delivers choice and flexibility with concurrent support for RoCE v2 and iWARP technologies; Recommended as a discrete PCIe adapter for scale-up of Fujitsu's default DynamicLoM iWARP adapter capabilities -
Efficient networking
Increase VM density and accelerate multitenant networks with full offload for tunneling protocols; iSCSI Boot will be commercially supported once the server UEFI is implemented -
Connectivity
Enables provisioning of 10GbE ports for greater deployment flexibility through switch-independent NIC partitioning, Microsoft Windows Server, VMware ESXi, SLES, and RHEL
Tech Specs
| Controller Silicon |
Marvell(R) FastLinQ(TM) QL41132 10G Dual-Port Gigabit Ethernet Controller 10 Gbit/s |
| Connector type |
SFP+ |
| Number of Connectors |
2 |
| Auto Negotiation support |
Yes |
| Bus transfer rate |
8GT/s |
| Network protocol and standards compatibility |
IEEE 802.1q VLAN, IEEE 802.1Qaz Enhanced Transmission Selection (ETS), IEEE 802.1Qbb Priority Flow Control (PFC), IEEE 802.3x Flow Control, IPv4, IPv6 and mixed IPv4/IPv6 network protocols |
| LAN controller notes |
This Ethernet network adapter supports SFP+ Optical Transceiver Modules for 10 Gbps line rate, Twinax cables for 10 Gbps line rate. Interoperable with 10/40Gb Ethernet switches. The component ships with empty cages. Optical transceivers are commercial options. |
| HW Virtualization |
SR-IOV: up to 240 virtual functions, 120 per port, NPAR: up to 16 physical functions, 8 per port |
| Offloading |
- TCP Stateless Offloads (include checksum, TSO, TSS, RSS, and RSC) - TX/RX IP, TCP & UDP checksum offload (IPv4, IPv6) capabilities |
| Additional features |
Microsoft SDDC PREMIUM and STANDARD Logo Qualifiers for e.g., Storage Spaces Direct |
| Service Weblink |
https://www.fujitsu.com/emeia/support/ |
| Support Pack Options |
Globally available in major business areas: 9x5, Next Business Day Onsite Response Time 9x5, 4h Onsite Response Time (depending on country) 24x7, 4h Onsite Response Time (depending on country) |
Recommended Service | 24x7, Onsite Response Time: 4h - For locations outside of EMEA please contact your local Fujitsu partner. |
| Support Pack Options |
Globally available in major business areas: 9x5, Next Business Day Onsite Response Time 9x5, 4h Onsite Response Time (depending on country) 24x7, 4h Onsite Response Time (depending on country) |
| Recommended Service | 24x7, Onsite Response Time: 4h - For locations outside of EMEA please contact your local Fujitsu partner. |
