Skip to main content

Fujitsu

Global

Archived content

NOTE: this is an archived page and the content is likely to be out of date.

FUJITSU TWAIN32 Version 5.6

Device drivers, included in the TWAIN Toolkit are downloadable from this page.

Supported Scanner Models

  • M3099GH
  • M3099GX
  • M3099G
  • M3097DG
  • M3097G

OS

  • Microsoft® Windows® 95
  • Microsoft® Windows® 98
  • Microsoft® Windows® 98 Second Edition
  • Microsoft® WindowsNT® Workstation4.0
  • Microsoft® WindowsNT® Server4.0
  • Microsoft® Windows® 2000 Professional
  • Microsoft® Windows® Millennium Edition (M3097DG Only)

[Note]
When you use the device driver software above, appropriate ASPI manager software for your SCSI board is needed. Please ask the manufacturer of your SCSI board for the ASPI manager software.

Before Downloading - Software License Agreement Required

Before downloading this software, it is required that you accept the terms of the Software license agreement. Read the" terms of the Software license agreement " carefully. By downloading this driver software, you are deemed to have accepted this agreement.
* The driver installation method has changed. Please refer to the following installation procedure.

Driver download and installation

  • Ensure there is adequate hard-disk space.
  • Download the driver to your hard disk by clicking the "Download" link below.
Version 5.6.16.1x16 Disk space
[Download] FT56g1wg.exe (size: 4.64MB) 10Mbyte
  • Extract the downloaded archive file.
  • For example, execute the following command, and extract the file to your hard disk.
C:¥> [drive:][¥path][¥filename]
[drive:] is the drive name where the downloaded file is stored.
[¥path] is the pass name where the downloaded file is stored.
[¥filename] is the file name to be downloaded.
In case the existing driver still remains, after you uninstall it and execute the following command, please install the downloaded driver.
C:¥> [drive:][¥path]¥Disk1¥Setup.exe

The functions and operation of the driver are in the "User's Guide (851 KB)" or "TWAIN driver help". (The "User's Guide", requires Adobe® Acrobat® Reader 5.0 or later. If necessary, you can download it from: http://www.adobe.com.

Install the driver software in accordance with the following notes and methods.

  1. Please check if the scanner works correctly after install the Interface Adapter (SCSI-2).
  2. Install the 32bits ASPI manager bundled in the Interface Adapter. Fujitsu Japan confirmed its operation with the 32bits ASPI manager V4.01 or later version. If the ASPI manager earlier than V4.01 is installed, please contact the SCSI Interface adapter vendor and obtain the latest version. About the method of installation and confirmation, refer to the instruction provided with your adapter card.

For Windows® 95 user

32bits ASPI manager V4.01 or later version is required to install for the scanner. If you installed the ASPI manager earlier than V4.01, the scanner may not work normally. At start-up time, if the dialogue "Unknown device is found" appeared on the screen, press "Next" and close that dialogue. The device is registered as an "Unknown device" but it is able to use with no problem.
Depending on the version of Windows95, the name of this device driver "FUJITSU TWAIN32" may not appear on the "Select Source" of an application. If the version 4.00.950 or 4.00.950a of Windows95 is used, obtain and install the latest version of the COMDLG32.DLL file provided by Microsoft Inc. This file is included in the Internet Explorer 4.0 etc.

For WindowsNT® 4.0 user

Make sure to log in from the authority of administrator, and then start the installation.
32bits ASPI manager V4.01 or later version is required to install for the scanner.

For Windows® 98 user

At start-up time, if the dialogue "Unknown device is found" appeared on the screen, press "Next" and close that dialogue. The device is registered as an "Unknown device" but it is able to use with no problem. If the driver version 6 is installed in your device, the scanner is registered as an Image scanner device. The 32bits ASPI manager V4.01 or later version is required to install for the scanner.

For Windows® 2000 Professional Edition user

Make sure to log in from the authority of administrator, and then start the installation. At start-up time, if the dialogue "Unknown device is found" appeared on the screen, press "Next" and close that dialogue. The device is registered as an "Unknown device" but it is able to use with no problem. If the driver version 6 is installed in your device, the scanner is registered as an Image scanner. The 32bits ASPI manager V4.60 or later version is required to install for the scanner device.

For Windows® Me user

At start-up time, if the dialogue "Unknown device is found" appeared on the screen, press "Next" and close that dialogue. The device is registered as an "Unknown device" but it is able to use with no problem. If the driver version 6 is installed in your device, the scanner is registered as an Image scanner device. The 32bits ASPI manager V4.60 or later version is required to install for the scanner.

For any technical inquiries, please contact the location where you obtained the model.