Replacing the Print Cartridge

Replace the print cartridge in the following procedure:

(1) Replacing the Print Cartridge

1. Turn off the scanner.
2. Open the print cartridge cover from the middle part as shown below.
   
   

   

3. Squeeze both ends of the print cartridge holder to release the print cartridge holder lock and lift it open as shown below.

   

4. Remove the old print cartridge.
   
   

   

5. Remove the protective tape from the new print cartridge.
   
   

   

   
   
   

   ---

   ATTENTION:

   Do not touch the metal part of the cartridge or put the protective tape back on.

   ---

    

6. Insert the print cartridge with the tab part to the right.
   
   

   

   ---

   ATTENTION:

   Be careful not to scratch or damage the wiring film with the print cartridge.

   ---

    

7. Lower the print cartridge holder slowly until it is locked.

   

8. Move the print cartridge towards the printing position where documents pass through.
   
   

   

   ---

   ATTENTION:

   Note that, depending on the position of the print cartridge, when content to be printed is on the edge of a document, a part of the content may be printed outside of the document width.

   ---

    

9. Close the print cartridge cover.

   

10. Turn on the scanner.

 

(2) Resetting the Ink Counter

1. Confirm that the scanner is connected to the computer, then turn on the scanner.
2. Open the [Software Operation Panel] window.
   • Windows Vista/Windows Server 2008/Windows 7
     Select [Start] menu → [All Programs] → [fi Series] → [Software Operation Panel].
   • Windows Server 2012/Windows 8
     Right-click the Start screen, and select [All apps] on the app bar → [Software Operation Panel] under [fi Series].
   • Windows Server 2012 R2/Windows 8.1
     Click [↓] on the lower left side of the Start screen and select [Software Operation Panel] under [fi Series].
     To display [↓], move the mouse cursor.
   • Windows 10
     Select [Start] menu → [All apps] → [fi Series] → [Software Operation Panel].
3. From the listing on the left, select [Device Setting].
   
   

   

4. Click the [Clear] button for the ink counter.
   → The counter is reset to "100".
5. Click the [OK] button on the [Software Operation Panel] window.
   → A message window appears.
6. Click the [OK] button.
   → The settings are saved.