Replacing the Print Cartridges

Follow the procedure below to replace the print cartridges.

Back-Side Imprinter (Click here.)

Front-Side Imprinter

1. Confirm that the scanner is turned off.
2. Push up the top cover release tab with your fingers to open the top cover.
   
3. Lift the output feeder unit.
   
4. Move the print cartridge holder to a location where a print cartridge can be installed easily.
   
5. Open the print cartridge holder cover.
   1. Press the release tab to release the lock.
   2. Open the cover to the left.
      
6. Remove the print cartridge.
   
7. Remove the new print cartridge from its pouch, and remove the protective tape.
   
8. Insert the print cartridge into the print cartridge holder.
   

   		A : Tab

9. Gently close the print cartridge holder cover on the right side until it is locked, to fix the print cartridge.
   
10. Align the top of the print position pointer with the print position mark where printing should be performed on the document.

    ---

    CAUTION:

    When setting a print cartridge, align the top of the print position pointer with the print position mark where printing should be performed on the document. Otherwise, printing may not be performed properly, or the document may be smudged with ink.

    ---

11. Close the output feeder unit and then the top cover.
    
12. Turn on the scanner.
13. Reset the ink level counter. (Refer to Resetting the Ink Level Counter.)

14.  

Back-Side Imprinter

1. Confirm that the scanner is turned off.
2. Open the back-side imprinter cover by pressing the cover tab.
   
3. Move the print cartridge holder to a location where a print cartridge can be installed easily.
   
4. Open the print cartridge holder cover.
   1. Pinch the release tab to release the lock.
   2. Open the cover to the right.
      
5. Remove the print cartridge.
   
6. Remove the new print cartridge from its pouch, and remove the protective tape.
   
7. Insert the print cartridge into the print cartridge holder.
   

   		A : Tab

8. Gently close the print cartridge holder cover on the left side until it is locked, to fix the print cartridge.
   
9. Align the top of the print position pointer with the print position mark where printing should be performed on the document.

   ---

   CAUTION:

   When setting a print cartridge, align the top of the print position pointer with the print position mark where printing should be performed on the document. Otherwise, printing may not be performed properly, or the document may be smudged with ink.

   ---

10. Close the back-side imprinter cover.
11. Turn on the scanner.
12. Reset the ink level counter. (Refer to Resetting the Ink Level Counter.)

Resetting the Ink Level Counter

1. Before turning on the scanner, make sure that it is connected to your computer.
2. From the [Start] menu, select [All Programs] → [fi Series] → [Software Operation Panel].

   → The Software Operation Panel appears.

3. Select [Device Setting].
   The following dialog box appears.

   

4. Click the [Clear] button for the ink level counter for the replaced print cartridge.

   → The ink level counter is reset to 100%.

5. Click the [OK] button on the Software Operation Panel.