Print Cartridge Not Installed (Front-Side Imprinter)

When the print cartridge is not installed in the front-side imprinter, the following error codes is displayed on the LCD of the scanner's operator panel.

U6:BA

 

No print cartridge is installed in the front-side imprinter. Follow the procedure below to install the print cartridge in the front-side imprinter.

1. Confirm that the scanner is turned off.
2. Push up the top cover release tab with your fingers to open the top cover.
   
3. Lift the output feeder unit.
   
4. Move the print cartridge holder to a location where a print cartridge can be installed easily.
   
5. Open the print cartridge holder cover.
   1. Press the release tab to release the lock.
   2. Open the cover to the left.
      
6. Remove the new print cartridge from its pouch, and remove the protective tape.
   
7. Insert the print cartridge into the print cartridge holder.
   

   		A : Tab

8. Gently close the print cartridge holder cover on the right side until it is locked, to fix the print cartridge.
   
9. Align the top of the print position pointer with the print position mark where printing should be performed on the document.

   ---

   CAUTION:

   When setting a print cartridge, align the top of the print position pointer with the print position mark where printing should be performed on the document. Otherwise, printing may not be performed properly, or the document may be smudged with ink.

   ---

10. Close the output feeder unit, and then the top cover.
11. Turn on the scanner.

For information on how to replace the print cartridge, refer to Replacing the Print Cartridges.