Archived content
NOTE: this is an archived page and the content is likely to be out of date.
Optical Error (Flatbed)
When an optical error (flatbed) occurs, the following error codes is displayed on the LCD of the operator panel.
| E1:7E |
- Confirm that the transport lock switch is not locked.
- Clean the document bed (glass section) by referring to "Cleaning the Flatbed".
- Turn the scanner off then back on.
If the problem persists, write down the error code displayed in the Error Recovery Guide window, and contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
