GTM-W5W3BK9
Skip to main content
  1. Home >
  2. About Fujitsu >
  3. Resources >
  4. News >
  5. Press Releases >
  6. 2013 >
  7. Fujitsu Demonstrates First ADC Device in Family of 28nm CMOS Converter Solutions

Fujitsu Demonstrates First ADC Device in Family of 28nm CMOS Converter Solutions

Scalable solutions for single to multi-channel SoCs addressing applications from short-range interconnect to long-haul optical networking.

Fujitsu Semiconductor (Shanghai) Company Limited

Shanghai, March 18, 2013

Fujitsu Semiconductor (Shanghai) Co., Ltd. has enabled the large-scale deployment of single-wavelength 100Gbps optical transport systems worldwide. Fujitsu’s expertise in mixed-signal, thermal, power-optimization and high-performance package design are key ingredients for providing SoC ASIC solutions to system vendors, paving the way for the necessary upgrade to global networking infrastructure brought on by ever-increasing bandwidth demand and traffic flow.

This demand is expected to move the requirement for 100Gbps capacity lambdas from the long-haul network, running over a few thousand kilometers, to the mid-haul, or Metropolitan Area Network (MAN).

Distances are shorter in Metro networks (up to a few hundred kilometers), but port densities are higher so mechanical and thermal constraints will push 100Gbps SoC designs to be correspondingly even more power-efficient. At the same time, expectations are that system solution providers will need to be supported by SoC designs that will increase the capacity and spectral efficiency in the core network. This, in turn, will demand higher sampling rate converters for higher-order modulation schemes.

20130318

Fujitsu demonstrates first ADC device in family of 28nm CMOS converter solutions at OFC/NFOEC conference.

Larger View (236 KB)

Power-efficient 28nm converters

Now in its third process technology generation for high-speed ADCs (Analogue-to-Digital Converter) and DACs (Digital-to-Analogue Converter), Fujitsu is launching the first ADC in a family of low power 28nm converters that will address system requirements for a range of different applications. The first ADC variant, developed in 28nm technology, supports sampling rates from 55 – 70GSps with scalable analogue bandwidth. It will be followed shortly by a DAC with the same sampling rate range. Subsequent variants, all available for system designs in 2013, will support sampling rates ranging from 28 to 90+ GSa/s. The converters can be used in a number of different channel-count configurations and all variants will be 8-bit and scale down in power based on sampling rate. The 28nm converters also scale down in power compared to the Fujitsu CHAIS converters offered in 40nm process technology.

Alongside the growing volume of 100Gbps long-haul optical transport deployments, there is a demand for future solutions based on advanced modulation techniques combined with high-speed, high-resolution low-power converters to address growing bandwidth demands in a number of sectors. This includes everything from inter- and intra-datacenter optical links for 100Gbps Ethernet over a few hundreds of meters to interconnect across a PCB or a backplane channel. As in the Metro transport market, this is pushing high-speed converter designs to be increasingly flexible and power-efficient. Building on over six years of design experience spanning three process technology nodes, Fujitsu continues to be at the forefront of analogue design to support the needs of these new and growing market challenges.

About Fujitsu Semiconductor (Shanghai) Co.,Ltd.

Fujitsu Semiconductor (Shanghai) Co., Ltd. was established in August 2003 as Fujitsu’s semiconductor business representative in China. Headquartered in Shanghai, it has branch offices in Beijing, Shenzhen and Dalian to provide sales and service support to customers throughout China.
Fujitsu Semiconductor (Shanghai) Co., Ltd. offers an extensive range of products from microcontroller, application-specific integrated circuit (ASIC), application-specific standard product (ASSP), system-on-chip (SoC) to system memory, that can be supplied as product or complete solution. With technology resource centres and ASIC design support centres strategically located in Hong Kong , Shanghai, Taiwan and Chengdu, as well as Heavy investments in design and engineering capabilities and application support resources, complemented by a regional network of design partners, suppliers and distributors, Fujitsu Semiconductor (Shanghai) Co., Ltd. can readily delivers innovative and value-added solutions and varied range of products to its target markets in China.
For more information, please see: http://www.fujitsu.com/cn/en/about/local/subsidiaries/fsp/about/

Corporate Planning & Communications:Miao Cao (Ms)

Phone: Phone: +86 21-6146 3688
Fax: +86 21-6335 1610
E-mail: E-mail: fss.marcom@cn.fujitsu.com
Company:Fujitsu Semiconductor (Shanghai) Co., Ltd.


All company or product names mentioned herein are trademarks or registered trademarks of their respective owners. Information provided in this press release is accurate at time of publication and is subject to change without advance notice.

Press Release ID: 2013-03-18
Date: 18 March, 2013
City: Shanghai
Company: Fujitsu Semiconductor (Shanghai) Co., Ltd.

Products

Corporate

Country Selector

China

Change

World Map