Software Downloads for TeamPoS 3000 Products:
Use the selection list below to choose which system you have.
Software Downloads for TeamPoS 2000 Products:
Step 1. Identify which motherboard is installed in your TeamPoS 2000 terminal(s)
The TeamPoS 2000 terminal can be configured with any of three different motherboards. Motherboards A and H use one set of drivers; the M motherboard requires a different set.
To identify which motherboard is installed, look for a configurator or Product Identification Number (PIN) located on the right side of the terminal. The configurator is a fifteen-character alphanumeric identifier that starts with a number from 1-6; the second character will be an A, H or M. This second character designates the type of motherboard installed.
An A or H character indicates the motherboard uses the Pentium III driver sets. If the second character is an M, the motherboard uses the Pentium M drivers.
TeamPoS 2000 Series Installation and Maintenance Manual
Installation and Maintenance Manual Rev. 3
Step 2. Select the Motherboard
Use the selection list below to choose which motherboard you have.
Note: If upgrading from a Pentium III / Celeron motherboard to a Pentium M motherboard the documents below will assist you with the migration to the Pentium M Motherboard.
- PDF Hardware Upgrade (595kb)
- PDF Software Upgrade (1.2mb)
|