DESCRIPTION

Example Projects for MB951xxseries (F²MC-8FX)

7SegCounter:
This project shows a counter from 0..9 on the 7-segment display of the CONCERTO-Kit.

• ADC:
  This examples converts the value on pin AN0 and outputs the voltage value via UART.
• CONCERTO-Kit:
  
  • 1) up/down counter (0..9) on 7-Segments
  • 2) UART'0' will be echoed (9600Baud @ 10MHz (4Mhz crystal)
  • 3) Press Key INT10 for up counting
  • 4) Press Key INT11 for down counting
• ExtInt:
  If the button SW1 (external interrupt INT10) is pressed then '0' is shown on the 7-segment display of the CONCERTO-Kit. If the button SW3 (external interrupt INT11) is pressed then '1' is shown on the 7-segment display of the CONCERTO-Kit
• IOPort:
  In this example the 7-segment display will show "FUJITSU" as separate chars. Then the infinity sign will be animated.
• LIN_master:
  This example shows basic functionality of LIN-Master bus operations with the LIN-UART.
• LIN_slave:
  This example shows basic functionality of LIN-Slave bus operations with the LIN-UART.
• LIN_UART:
  This example sends a welcome string via LIN_UART (asynchronous mode 8N1) and echoes all received characters. Parameters: 8N1, 9600Baud @ 10MHz (4Mhz crystal) Close jumper JP4/2-3 and JP5/2-3 on the CONCERTO-Kit in order to use RS232 transceiver connected to X3.
• PPG8bit:
  Description: This project uses the 8/16-bit PPG in 8-bit mode to output a PWM waveform.
• PPG8+8bit:
• PPG16bit:
  This project uses the 8/16-bit PPG in 16-bit mode to output a PWM waveform.
• PPGTimer:
  This project uses the 16-bit PPG timer to output a PWM waveform.
• ReloadTimer:
  This project uses the 8/16-bit PPG in 8-bit prescaler + 8-bit PPG mode to output a PWM waveform.
• Template:
  This is a project template for the 8FX Series (MB95xxx). It includes some basic settings for e.g. Linker, C-Compiler which must be checked and modified in detail, corresponding to the user application.
• Template_CONCERTOkit:
  This is a project template for the MB95F108 (8FX Series) that is used on the evaluation board CONCERT-Kit. It includes some basic settings for e.g. Linker, C-Compiler which must be checked and modified in detail, corresponding to the user application.
• UART:
  This example sends a welcome string via UART0 and echoes all received characters. Parameters: 8N1, 9600Baud @ 10MHz (4Mhz crystal). Close jumper JP4/3-4 and JP5/3-4 on the CONCERTO-Kit.
• History of the MB951xx:

DOWNLOAD

EXESelf-extracting SmplMB951xx Series V01R04 (1210 KB, 11. Sep 2006)

ZIP951xx_eeprom-emulation_concertokit-v11.zip

ZIP95100_template_bassoon_mb95f108-v12.zip

ZIP95110_template_clarinet_mb95f118-v12.zip

ZIP95120_template_tuba_mb95f128-v12.zip

ZIP95130_template_flute_mb95f136-v12.zip