DESCRIPTION

To install the Software Sample Files please download the compressed self-extracting file. The Standard Installation Target Directory is:

C:\Softune\sample\smpl16

FEATUTRES

Example Projects for MB90800 MCU

• FlashCan100P340_800
  This is a demoproject for Flash-Can-100P-340 Evaluation-Board with a Flash device of MB90800series assembled.
  - running LED light on User-LEDs (P00-P07)
  - initialisation of UART0 (UART"A") and send out welcome-string (9600Baud)
  - initialisation of UART1 (UART"B") and send out welcome-string (9600Baud)
  - Each character received via UART0 (UART"A") will be echoed
  - Each character received via UART1 (UART"B") will be echoed
  - Key-buttons INT0, INT1, TIN1, IN0 and ADTG will be confirmed by UART-message
• LCD
  The internal LCD-cotroller will be initialised (1/3 bias, 1/4 duty). The internal Resistor devider is used. Some different methods are shown, how segments can be swicthed on/off.
• PPG
  This project shows the functionality of the 16bit PPG unit PPG0 is set to f=125kHz/10, Duty=50% (5:10) (output @ Pin27) PPG1 is set to f=125kHz/10, Duty=10% (1:10) (output @ Pin28)
• ReloadTimer
  This project shows the functionality of the Reload-Timer The interrupt of the reload-timer 0 ( 100us) toggles port P00 (LED1) The interrupt of the reload-timer 1 ( 1000us) toggles port P01 (LED2) The interrupt of the reload-timer 2 (10000us) toggles port P02 (LED3)
• Template
  This is a project template for the MB90800 Series. It includes some basic settings for e.g. Linker, C-Compiler which must be checked and modified in detail, corresponding to the user application.
• UART0
  This project shows the functionality of the UART0. An welcome string is sent via UART0 All received characters are echoed Baud rate 9600 @ 16MHz, no parity, 1 stop bit and a data length of 8 bit. No interrupts are used.
• UART1
  This project shows the functionality of the UART1. An welcome string is sent via UART1 All received characters are echoed Baud rate 9600 @ 16MHz, no parity, 1 stop bit and a data length of 8 bit. No interrupts are used.
• UART_ADC
  The UART_ADC example project will convert continously the ADC channel 0..2 The channel-number and value will be send via UART0 (9600Baud @ 16MHz) No interrupt is used.
• WatchTimer
  This project shows the functionality of the Watch-Timer The interrupt of the watch-timer (1sec) toggles port P07 (LED8)
  NOTE: Use dual-clock microcontroller, e.g. MB90F804-201
• History of the MB90800:

DOWNLOAD

Note: Netscape Navigator 4.xx does not allow direct execution of ".exe" files. Saving them to a temporary folder and executing them there is recommended.

EXESelf-extracting Sample Files for MB90800 Series V01R02 (368 KB, 11.September 2006