DESCRIPTION

To install the Software Sample Files please download the compressed self-extracting file. The Standard Installation Target Directory is:

C:\Softune\sample\smpl16

FEATURES

• Boot Loader:
  This project cotains a boot strap loader. It can be used to create application specific bootloaders.
• IOPORT Project:
  IOPort-project simply counts down an internal variable and outputs the counter value to port0. No interrupts are used.
• PPG Project:
  Interrupt service routine of Reload-timer0 is used to modify PPG channel 1.
• Reload Project:
  Reload-project uses interrupts of reload-timer0 and reload-timer1 to toggle LEDs.
• Template Project:
  This is a project template for the MB90580 Series. It includes some basic settings for e.g. Linker, C-Compiler which must be checked and modified in detail, corresponding to the user application.
• SCI Reload Project:
  Project which sets up Serial Channel 0 to Asynchronous mode. The Baud Rate Generator is selected as the relaod Timer
• DA-Converter:
  Example project to initialize the DA Converter and output a rising edge (sawtooth curve).
• UART1_EIIOS:
  This sample project shows how to use EIIOS with UART1. UART1 is set up to 9600asynchronous transfer (transmit only). Via EIIOS DATA is written to SODR1 Register.
• History of the MB90580:

DOWNLOAD

Note: Netscape Navigator 4.xx does not allow direct execution of ".exe" files. Saving them to a temporary folder and executing them there is recommended.

EXESelf-extracting Sample Files for MB90580 Series V01R05 (424 KB, 11.September 2006)