FUJITSU


MB90550 Series

SMPL16

DESCRIPTION

To install the Software Sample Files please download the compressed self-extracting file. The Standard Installation Target Directory is:

C:\Softune\sample\smpl16

FEATUTRES

  • Template
    This is a project template for the MB90550 Series. It includes some basic settings for e.g. Linker, C-Compiler which must be checked and modified in detail, corresponding to the user application.
  • ADC
    The project shows how to set-up the ADC. Using channel 0, software start, no interrupts used. Bootload This project contains a boot strap loader. It can be used to create application specific bootloaders. This example use the UART interface to download the software to the internal Flash memory.
  • EIIOSSIO
    This is a demo program to use the Extended Intelligent I/O service (EIIOS) with the SIO interface.
  • EIIOSUaSo
    This is a demo program to use the EIIOS with the UART or the SIO interface. In the software either the UART or the SIO can be initialized, default is UART.
  • IIC550
    Simple demo program to initialise I²C bus interface 1. The program outputs data bytes 55hex and AAhex periodically.
  • I2C_0_INT
    Demo program using I2C ch.0 with Interrupts. It is possible to send/read data from slave via UART/ Terminal program (e.g. SKwizard). This demo shows master mode, only.
  • IOPort
    IOPort-project simply counts down an internal variable and outputs the counter value to port4.
  • PPG550
    Inistialises PPG channel 1 and uses Interrupt service routine of Reload-timer0 to modify duty cycle of PPG channel 1.
  • RLT550
    Simple Demoproject using interrupts of reload-timer0 and reload-timer1 to toggle two LEDs. stop This projects shows how to set CPU into stop mode. The CPU can be released with external interupt0 by low level detection.
  • sleep
    This is a project shows how to set the CPU into sleep mode. The INT0 can be used to wake-up the CPU.
  • History of the MB90550:
Date Revision Description
11.09.06 V01R05 Updated Sample Package Released
12.05.03 V01R04 Example package released
29.01.03 - new header files
09.01.03 - ADC sample added
08.11.02 V01R03 sample package released
25.10.02 - disclaimer added to all source files
13.08.02 - I2C0_INT project added
23.07.02 - new Header-File, Template updated
13.06.01 V01R02 Example Package released
10.04.01 V01R01 Example Package released
27.03.01 - Stop and sleep project added
08.08.00 - new header files copied to template prj
10.07.00 V01R00 Example Package released

DOWNLOAD

Note: Netscape Navigator 4.xx does not allow direct execution of ".exe" files. Saving them to a temporary folder and executing them there is recommended.

EXESelf-extracting Sample Files for MB90550 Series V01R05 (496 KB, 11. September 2006)