MB90545 Series
SMPL16
DESCRIPTION
To install the Software Sample Files please download the compressed self-extracting file. The Standard Installation Target Directory is:
C:\Softune\sample\smpl16
FEATUTRES
- Template
This is a project template for the MB90545 Series. It includes some basic settings for e.g. Linker, C-Compiler which must be checked and modified in detail, corresponding to the user application. - IOPort
IOPort-project simply counts down an internal variable and outputs the counter value to port1. No interrupts are used. - PPG
Interrupt service routine of Reload-timer0 is used to modify PPG channel 1. If you connect Pin 18 and 62 of MB90545 by using the FLASH-CAN-100P-M06 evaluation board, PPG output is fed back to LED D1. You can see D1 being dimmed. - Reload
Simple Demoproject using interrupts of reload-timer0 and reload-timer1 to toggle two LEDs. - OCU_4channels
Demoproject to use the 4 OCU channels to generate a square wave. The period of the signal is here defined by the presetting of the 16-Bit I/O Timer. The duty cycle can be selceted via the output compare registers - modified in the interrupt service routine of the 16-Bit I/O Timer. - FlashWrite This sample project demonstrates the programming of the internal flash memory. The routines itself are executed in RAM. The code is permanently located in RAM during run-time.
- FlashEraseSuspend
This sample project demostrates the erasing of the Flash memory. How to suspend and restart the Flash erasing. The routines itself are executed in RAM. The code is permanently located in RAM during run-time. - ICU+EIIOS
The EIIOS sample shows how to use the Input capture Units with EIIOS transfer. Input Capture0 is initialised to both-edge detection (Pin 53 of MB90540 series). The 16-Bit I/O Timer is initialised, Presacler 1/16 (1us at 16MHz) and started. - INT9
This Project shows the use of Software Interrupt INT9. - History of the MB90545:
| Date | Revision | Description |
| 11.09.06 | V01R05 | Updated Sample Package Released |
| 12.05.03 | V01R04 | Example package released |
| 29.01.03 | - | new header files |
| 12.11.02 | V01R03 | Example package released |
| 25.10.02 | - | disclaimer added to all source files |
| 23.07.02 | - | new Header-File, Template updated |
| 07.01.02 | - | new header files copied to template prj |
| 27.09.01 | - | INT9 project added |
| 24.09.01 | - | ICU+EIIOS project added |
| 13.06.01 | V01R02 | Example Package released |
| 30.05.01 | - | Read-Modify-Write change for PPG-sample |
| 10.04.01 | V01R01 | Example Package released |
| 28.03.01 | - | new header files copied to template prj |
| 22.03.01 | - | Project FlashWrite added |
| 22.03.01 | - | Project FlashEraseSuspend added |
| 14.12.00 | - | Project OCU_4channels added |
| 10.08.00 | V01R00 | Example Package released |
| 08.08.00 | - | new header files copied to template prj. |
DOWNLOAD
Note: Netscape Navigator 4.xx does not allow direct execution of ".exe" files. Saving them to a temporary folder and executing them there is recommended.
EXESelf-extracting Sample Files for MB90545 Series V01R05 (460 KB, 11.September 2006)
