DESCRIPTION

Example Projects for MB90360 MCU
Please refer to MB90340series to find more examples !!!

NOTE:
The header-file will cover more features than available in the MB90360series.
Please DO NOT USE resources / registers others than specified for the dedicated Flash-/Mask-version. Please refer to the datasheet and hardwaremanual of the MB90360series.

FEATURES

• Clock_Supervisor:
  This project demonstrates the functionality of the clock supervisor. Depending on the reset cause different 'C'-functions are called. Using the evaluation board 'Flash-CAN-48P' LEDs indicate the last reset cause and the operating 'C'-function.
• FlashCan48P_90360:
  This project uses UART0, UART1 and CAN together with the Flash-Can-48P evaluation board. IOPort: This example toggles a simple port pin.
• ReloadTimer:
  This project uses interrupts of reload-timers 2 and 3 to toggle LEDs.
• Template:
  This is a project template for the MB90340 Series. It includes some basic settings for e.g. Linker, C-Compiler which must be checked and modified in detail, corresponding to the user application.
• UART0_async:
  It is a test application to send an welcome string via UART0 and echoes all received characters. Baud rate 9600 @ 24MHz, no parity, 1 stop bit and a data length of 8 bit. No interrupts are used.
• UART1_async:
  It is a test application to send an welcome string via UART1 and echoes all received characters. Baud rate 9600 @ 24MHz, no parity, 1 stop bit and a data length of 8 bit.
  No interrupts are used.
• History of the MB90360:

DOWNLOAD

Note: Netscape Navigator 4.xx does not allow direct execution of ".exe" files. Saving them to a temporary folder and executing them there is recommended.

EXESelf-extracting Sample Files for MB90360 Series V01R03 (372 KB, 11. September 2006)