DESCRIPTION

To install the Software Sample Files please download the compressed self-extracting file. The Standard Installation Target Directory is:

C:\Softune\sample\smpl16

FEATURES

Example Projects for DICE-Kit (MB90350series)

NOTE:
The header-file will cover all features of the Emulation chip MB90V340/S. No Flash- or Mask- version of the MB90340series will support all features! Limitaions can be found in UARTs, CANs, I2C, ADC, etc. Please DO NOT USE resources / registers others than specified for the dedicated Flash-/Mask-version. Please refer to the datasheet and hardwaremanual of the MB90340series.

• CAN_Uart:
  The CAN_UART example show functionality of the CAN-controller. The program is controled by a PC-terminal-program via UART1 (9600Baud)
• Counter:
  This project shows a counter from 0..99 on the two 7-segment display
• Dice2:
  This projects simulates two dices. SEG1 is dice1 and can be started by pressing key SW2 (INT8) SEG2 is dice2 and can be started by pressing key SW3 (INT9) After a while the started dice will stop displaying a value from 1..6.
• DICE-Kit:
  Test-program for the DICE-Kit (UART, CAN, 7-Seg, Keys, Watchdog)
• Template:
  Basic settings for e.g. Linker, C-Compiler when starting a new the user application.
• Uart:
  The UART3 is initialized to 9600Baud @ 24MHz (4Mhz crystal). One string is send out after reset. Each received character will be echoed.
• History of the MB90340:

DOWNLOAD

Note: Netscape Navigator 4.xx does not allow direct execution of ".exe" files. Saving them to a temporary folder and executing them there is recommended.

EXESelf-extracting Sample Files for Dice-Kit V01R01 (417 KB, 16. November 2004)