MB91660 Series : MB91F662PMC
- Product Features
- Documentation
- Starterkits
- Debugger and Emulator
- (FLASH-)ROM Programming Tools
- Software Examples
- Application Notes
SERIES KEY FEATURES
DESCRIPTION
The FR family is a line of microcontrollers based on a 32-bit RISC CPU that contains a variety of built-in I/O resources for embedded control application which require high-performance, high-speed CPU processing and USB I/F.
BLOCK DIAGRAM
PRODUCT FEATURES
| Specification | Description |
| CPU [Bits] | 32 |
| Package | FPT-120P-M21 |
| Pincount | 120 |
| Flash memory | 512.00 KByte |
| Data RAM | 48.00 KByte |
| VCC min | 2.70 V |
| VCC max | 3.60 V |
| Min. Temperature | -40 °C |
| Max. Temperature | 85 °C |
| Max. CPU frequency | 32.00 MHz |
| DMA channels | 8 |
| Max. I/Os | 99 |
| A/D channels | 24 |
| A/D resolution | 10 bit |
| A/D conversion time (min.) | 2.000 µs |
| MFS: UART, SIO (Serial I/O), I2C | 12 |
| Output Compare Unit (OCU) | 8 |
| Input Capture Unit (ICU) | 8 |
| IOTimer | 2 |
| Reload Timer | 3 |
| Watchdog | 1 |
| External Bus | yes |
| External Bus mode | Non-Multiplexed |
| Chip-Selects | 3 |
| External IRQ | 32 |
DOCUMENTATION
- Customer Information
MB91660-CustomerDesignReviewSuppliment
- Datasheet
ds91660-ds07-16905-3e
- Hardware Manual
hm91660-cm71-10146-1e
- Hardware Manual Correction
hm91660-cm71-10146-1et
- Instruction Manual
progfr-cm71-00101-5e
- Package Dimension-datasheet
FPT-120P-M21-Dimension
STARTERKITS
- Starterkit
USB-100 Starter Kit
DEBUGGER and EMULATOR
EVA-Chip EVA-Chip
MB91V660-DSU4- DSU Cable
MB2198-10-E
- Emulation Main Unit
MB2198-01-E
- MB2198-700-E OPERATION MANUAL
mb91660-ss01-71081-1e
- MB2198-701-E OPERATION MANUAL
mb91660-ss01-71078-1e
- MB2198-790-01-E OPERATION MANUAL
mb91660-ss01-71082-1e
- Starterkit-user_manual
USB-100UserManual
(FLASH-)ROM Programming Tools
SOFTWARE EXAMPLES
The following software is for demonstration purposes only. It is neither fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
Software sample files to run demo on Starterkit along with Monitor debug hex file for debugging
sample_program.zipSoftware sample project files for ICU/OCU, FRT, ADC, Reload Timer, UD Counter, Base Timer, DMAC, MFT, DAC
mb91660-Peripheral-samplecode.zip
APPLICATION NOTES
Please find a selection of Application Notes here or check the complete overview:
- DMAC Access Speed
AN07-00156-1E
- MB2198-700-E Emulator Adapter Set up Guide
AN07-00149-1E
- This Application Note describes how to setup the Softune Workbench to automatically start the debugger at start.
mcu-an-300097-e-v11
- This application note will help you how to debug the application with Softune Workbench V6 Simulator. The simulator debugger
simulates the MCU operations (executing instructions, memory space, I/O ports, interrupts, reset, etc.) with software to evaluate
a program.
mcu-an-300103-e-v10
