MB91480 Series : MB91F487PMC
- Product Features
- Documentation
- Starterkits
- Debugger and Emulator
- (FLASH-)ROM Programming Tools
- Software Examples
- Application Notes
SERIES KEY FEATURES
DESCRIPTION
The Fujitsu MB91470/480 Series is designed for a wide range of applications requiring high performance, 3-phase motor control as well as high-speed signal processing.
BLOCK DIAGRAM
PRODUCT FEATURES
| Specification | Description |
| CPU [Bits] | 32 |
| Package | FPT-100P-M20 |
| Pincount | 100 |
| Flash memory | 512.00 KByte |
| RAM (code & data) | 4.00 KByte |
| Data RAM | 28.00 KByte |
| VCC min | 4.00 V |
| VCC max | 5.50 V |
| Min. Temperature | -40 °C |
| Max. Temperature | 85 °C |
| Max. CPU frequency | 80.00 MHz |
| DMA channels | 5 |
| Max. I/Os | 77 |
| A/D Converter | 3 |
| A/D channels | 18 |
| A/D resolution | 10 bit |
| A/D conversion time (min.) | 1.200 µs |
| UART | 3 |
| SIO (Serial I/O) | 3 |
| I2C | 3 |
| Programmable Pulse Generator (PPG) | 20 |
| Pulse Width Modulator (PWM) | 4 |
| Output Compare Unit (OCU) | 12 |
| Input Capture Unit (ICU) | 8 |
| Waveform Generator (WFG) | 12 |
| IOTimer | 6 |
| Reload Timer | 6 |
| Watchdog | 1 |
| External IRQ | 11 |
DOCUMENTATION
- Customer Information
CI-300015-E-MB91470_480_Multi_Function_Timer
- Datasheet
ds91470_480-ds07-16901-5e
- Hardware Manual
hm91470_480-cm71-10134-4e
- Hardware Manual Correction
hm91470_480-cm71-10134-4et4
- Instruction Manual
progfr-cm71-00101-5e
- Package datasheet
fpt-100p-m20
DEBUGGER and EMULATOR
Monitor Debugger
- Monitor Debugger
Accemic-MDE
Emulation Main Unit
EVA-Chip EVA-Chip
MB91FV470-DSU4- Accessory Kit
ACCESSORIES32
- DSU Cable
MB2198-10-E
- Emulation Main Unit
MB2198-01-E
- Emulation Pod/Adapter
MB2198-160-E
- Probe Cable
MB2198-162-E
(FLASH-)ROM Programming Tools
- FLASH_PROGRAMMER_FR_FJ
serial (async)
SOFTWARE EXAMPLES
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
APPLICATION NOTES
Please find a selection of Application Notes here or check the complete overview:
- This Application Note describes how to setup the Softune Workbench to automatically start the debugger at start.
- This application note explains the usage of the 32-bit MAC-Unit of the MB91470/480 series.
- This application note explains the usage of the ADC units of the MB91470/480 series.
- This application note provides some information and recommendations how to connect external crystals or resonators to Fujitsu microcontrollers. In order to achieve a proper and stable clock oscillation the composition of external circuits, PCB layout design and the microcontroller must be taken into account and evaluated carefully
- This application note shows some possibilies to drive a BLDC motor with different MCUs using a single PPG.
- This application note will help you how to debug the application with Softune Workbench V6 Simulator. The simulator debugger simulates the MCU operations (executing instructions, memory space, I/O ports, interrupts, reset, etc.) with software to evaluate a program.
