MB91260 Series : MB91F264BPFV
- Product Features
- Documentation
- Starterkits
- Debugger and Emulator
- (FLASH-)ROM Programming Tools
- Application Notes
SERIES KEY FEATURES
DESCRIPTION
The FRLite series MB91260 includes the MB91F264 and MB91263 MCUs, which are designed for a wide range of consumer appliances
that require motor control or inverter control in washing machines, air conditioners, printers, automobile systems and similar
products.
BLOCK DIAGRAM
PRODUCT FEATURES
| Specification | Description |
| CPU [Bits] | 32 |
| Package | FPT-100P-M05 |
| Pincount | 100 |
| Flash memory | 256.00 KByte |
| RAM (code & data) | 8.00 KByte |
| VCC min | 4.50 V |
| VCC max | 5.50 V |
| Min. Temperature | -40 °C |
| Max. Temperature | 85 °C |
| Max. CPU frequency | 33.00 MHz |
| DMA channels | 5 |
| Max. I/Os | 78 |
| A/D Converter | 3 |
| A/D channels | 12 |
| A/D resolution | 10 bit |
| UART | 3 |
| IEBus | 1 |
| Pulse Width Modulator (PWM) | 8 |
| Output Compare Unit (OCU) | 6 |
| Input Capture Unit (ICU) | 2 |
| Waveform Generator (WFG) | 1 |
| IOTimer | 2 |
| Pulse Width Counter (PWC) | 2 |
| Reload Timer | 3 |
| Timebase Timer (TBT) | 1 |
| Watchdog | 1 |
| External IRQ | 10 |
DOCUMENTATION
- Datasheet
ds91260b-ds07-16507-3e
- Hardware Manual
hm91260b-cm71-10127-2e
- Hardware Manual Correction
hm91260b-cm71-10127-2et1
- Instruction Manual
progfr-cm71-00101-5e
- Package datasheet
fpt-100p-m05
STARTERKITS
DEBUGGER and EMULATOR
EVA-Chip EVA-Chip
MB91V260BCR-ESStarterkit
MB91921EB, Sun Hayato BBF-2001-FR100CAN2-NSSocket
NQPACK100SD-ND, HQPACK100SD- Accessory Kit
ACCESSORIES32
- Emulation Main Unit
MB2198-01-E
- Emulation Pod/Adapter
MB2198-130-E
- Probe Cable
MB2198-126-E
(FLASH-)ROM Programming Tools
MINATO
parrallelYOKOGAWA
serial- FLASH_PROGRAMMER_FR_FJ
serial (async)
APPLICATION NOTES
Please find a selection of Application Notes here or check the complete overview:
- This Application Note describes how to setup the Softune Workbench to automatically start the debugger at start.
- This application note provides some information and recommendations how to connect external crystals or resonators to Fujitsu microcontrollers. In order to achieve a proper and stable clock oscillation the composition of external circuits, PCB layout design and the microcontroller must be taken into account and evaluated carefully
- This application note will help you how to debug the application with Softune Workbench V6 Simulator. The simulator debugger simulates the MCU operations (executing instructions, memory space, I/O ports, interrupts, reset, etc.) with software to evaluate a program.
