DESCRIPTION
The SK-91F467-FLEXRAY is a multifunctional starter kit for the Fujitsu 32-bit Flash microcontroller MB91F467D series and Fujitsu FlexRay stand-alone communication controller MB88121 . The single board can be used autonomously for development and test of software using Softune Workbench Monitor debugger. Alternatively, the starter kit provides a plug-in for an emulator for the MB91F460 family. The starter kit is especially equipped for the analysis and use of the FlexRay bus system. The DECOMSYS::COMMSTACK driver library allows an easy access to the FlexRay Communication Controller (MB88121). Pre-compiled examples frees the user form own developments and demonstrate the capabilities of FlexRay. However with the configuration tool FlexConfig® the user can design its own communication matrix and generate the initialization code for the FlexRay Communication Controller (CHI files). The starter kit enables the designer to start immediately the development of software for its application even before his own target system is available.
FEATURES
- 32-bit Flash microcontroller MB91F467D
- 32 Mbit SRAM on-board memory:
- Interfaces
- FlexRay ASSP MB88121
- Two FlexRay channels (Ch-A, Ch-B)
- FlexRay physical layer RS-485 onboard
- FlexRay physical layer plug-in for PL-modules from TZM (FT1080)
- FlexRay ASSP MB88121
- Three High-Speed CAN interfaces
- Three selectable RS232 or LIN UART-interfaces
- External bus interface
- routed to 96pin and 48pin DIN 41612 (VG) connector for user applications
- Supported host interface modes to MB88121
- Power Supply
- Input: 9-12V (2000 mA) unregulated external DC power supply
- Outputs: 5 V, 3.3 V, 2.5 V, and 1.8 V on-board switching regulators with status-LEDs
- Triple supply monitor for 5 V, 3.3 V and selectable 2.5 V or 1.8 V
- All microcontroller resources available for application
- All microcontroller pins routed to pin header
- Reset button, Reset-LED
- In-Circuit serial Flash programming
- Miscellaneous
- 16 user LED
- 4 user buttons
- 8 bit port connected to DIP switches
- Plug-in for optional alphanumeric standard LC-Display
- CONTENT
- The SK-91F467-FLEXRAY starter kit comprises the following parts:
- SK-91F467-FLEXRAY board
- Power Supply
- Printed version of the user guide
- SK-91F467-FLEXRAY starter kit CD-ROM
- Microcontroller CD3.6 or higher
- Addendum sheet with latest important instructions
DOCUMENTATION
Note: The use of Adobe® Acrobat Reader is recommended to have all download and browsing features available for pdf files.
PDF User Manual V1-6 (3.62 MB)
PDF Schematic V1-1 (3 pages, 266 KB)
PDF Application Note V1-1 (19 pages, 5.43 MB)
