Microcontrollers Application Notes | 8-bit MCUs Application Notes | 16-bit MCUs Application Notes | 32-bit MCUs Application Notes |
8-bit Application Notes
Please find a selection of Application Notes here or check the complete overview:
- Customer information to inform about LIN conformance tests
mcu-an-300106-e-v10-lin_conformance_tests.pdf
- How to use the Softune Workbench Monitor Debugger for 8FX.
mcu-an-300049-e-v10-8fx_swb_monitor_debugger.pdf
- The Application Note describes the function and operation of low-voltage detection reset circuit.
mcu-an-500011-e-v11-8fx_lpc_lvd_reset.pdf
- This application note describes flash operation in MB95200H/210H Series.
mcu-an-500015-e-v11-8fx_lpc_flash_operation.zip
- This application note describes how to program the Flash device MB951xx in serial async mode.
mcu-an-395003-e-v13-8fx_async_flash_programming.pdf
- This application note describes how to program the Flash device MB951xx in serial sync mode by use of MB2146-09.
mcu-an-300050-e-v10-8fx_sync_flash_programming.pdf
- This application note describes how to set and use the External Interrupt.
mcu-an-500007-e-v11-8fx_lpc_external_interrupt.zip
- This Application Note describes how to setup the Softune Workbench to automatically start the debugger at start.
mcu-an-300097-e-v11-softune_workbench_automatic_debugger_start.pdf
- This application note describes how to start development with the Fujitsu F2MC-8FX Family MB95200H/210H Series.
mcu-an-500001-e-v11-8fx_lpc_quick_start_guide.pdf
- This application note describes how to start up the basic FW setting of the Fujitsu F2MC-8FX Family MB95200H/210H Series.
mcu-an-500002-e-v11-8fx_lpc_basic_fw_setup.zip
- This application note describes how to use 8/10-bit A/D converter in each mode.
mcu-an-500005-e-v11-8fx_lpc_adc.zip
- This application note describes how to use DBG pin.
mcu-an-500009-e-v10-8fx_lpc_debug_pin.zip
- This application note describes how to use IO Port.
mcu-an-500003-e-v11-8fx_lpc_io_port.zip
- This application note describes how to use the 8/16-bit composite timer in various modes.
mcu-an-500004-e-v11-8fx_lpc_timer.zip
- This application note describes how to use the Fujitsu’s LIN USART to control LIN devices (e.g.: AMIS-30621 stepper motor
driver).
mcu-an-300037-e-lin_stepper_amis.zip
- This application note describes how to use the LIN-UART in various modes.
mcu-an-500006-e-v11-8fx_lpc_lin_uart.pdf
- This application note describes how to use the watch-dog timer.
mcu-an-500013-e-v11-8fx_lpc_watchdog_timer.zip
- This application note describes how to use the wild register function.
mcu-an-500008-e-v11-8fx_lpc_wild_register.zip
- This application note describes the Flash Security.
mcu-an-500010-e-v11-8fx_lpc_flash_memory_security.zip
- This application note describes the functions and operations of Clock Supervisor Counter.
mcu-an-500012-e-v11-8fx_lpc_clock_supervisor_counter.zip
- This application note describes the main CR clock configuration and the CR trimming function.
mcu-an-500014-e-v10-8fx_lpc_cr_trimming.pdf
- This application note describes the most common SPI formats and how to implement them on Fujitsu 16-bit MCUs.
mcu-an-300002-e-v12-spi.pdf
- This application note gives a rough overview about how LCD displays work and illuminates different methods to control a LCD
by a microcontroller.
mcu-an-300001-e-v13-lcd.pdf
- This application note provides some information and recommendations how to connect external crystals or resonators to Fujitsu
microcontrollers. In order to achieve a proper and stable clock oscillation the composition of external circuits, PCB layout
design and the microcontroller must be taken into account and evaluated carefully
mcu-an-300007-e-v13-oscillator_configuration.pdf
- This application note shows some possibilies to drive a BLDC motor with different MCUs using a single PPG.
mcu-an-300020-e-ppg_bldc_drive.zip
- This appnote for the 8L Family gives hints to optimize the EMI performance.
mcu-an-389024-e-v11-8l_emc.pdf
- This document describes how to set up a new project for the 8FX Family.
mcu-an-395001-e-v11-8fx_swb_getting_started.pdf
- This installation guide will help you set up the MB2146-09 BGM adapter with the MB2146-301 or MB2146-303 MCU board for Fujitsu
8FX microcontroller and its usage with 8-bit Softune Workbench V30L29 or higher.
mcu-an-395002-e-v10-8fx_mb2146_09_emulator_hw_setup.pdf
