Microcontrollers Application Notes |  8-bit MCUs Application Notes |  16-bit MCUs Application Notes |  32-bit MCUs Application Notes |

---

32-bit Application Notes

Please find a selection of Application Notes here or check the complete overview:

• This Application Note describes how to setup the Softune Workbench to automatically start the debugger at start.

  mcu-an-300097-e-v11

• This application note explains the usage of the 16-bit MAC-Unit.

  mcu-an-300030-e-v12

• This application note explains the usage of the 32-bit MAC-Unit of the MB91470/480 series.

  mcu-an-300107-e-v10

• This application note explains the usage of the ADC units of the MB91470/480 series.

  mcu-an-300108-e-v10

• This application note gives an introduction to the MB91265 Series Multi-Function Timer and its usage for motor control.

  mcu-an-300009-e-v11

• This application note provides some information and recommendations how to connect external crystals or resonators to Fujitsu microcontrollers. In order to achieve a proper and stable clock oscillation the composition of external circuits, PCB layout design and the microcontroller must be taken into account and evaluated carefully

  mcu-an-300007-e-v13

• This application note shows a simple method to control a BLDC motor using an encoder.

  mcu-an-300018-e-v11

• This application note shows some possibilies to drive a BLDC motor with different MCUs using a single PPG.

  mcu-an-300020-e-v10

• This application note will help you how to debug the application with Softune Workbench V6 Simulator. The simulator debugger simulates the MCU operations (executing instructions, memory space, I/O ports, interrupts, reset, etc.) with software to evaluate a program.

  mcu-an-300103-e-v10

  Previous Page      1       2       3     4