APPLICATIONS

The MB90495G Series is a general-purpose, high-performance 16-bit microcontroller. It was designed for devices like consumer electronics, which require high-speed, real-time process control. This series features an on-chip full-CAN interface.

DESCRIPTION

In addition to being backwards compatible with the F²MC* family architecture, the instruction set has been expanded to add support for high-level language instructions, expanded addressing mode, and enhanced multiply/divide and bit processing instructions. A 32-bit accumulator is also provided, making it possible to process long word (32-bit) data. The MB90495G Series peripheral resources include on chip 8/10-bit A/D converter, UART (SCI) 0/1, 8/16-bit PPG timer, 16-bit I/O timer (16-bit free-run timer, input capture 0, 1, 2, 3 (ICU) ) , and CAN controller.

Note: * : F²MC, an abbreviation for FUJITSU Flexible Microcontroller, is a registered trademark of FUJITSU, Ltd.

FEATURES

• Clock
  
  • Built-in PLL clock multiplier circuit
  • Choose 1/2 oscillation clock or x1 to x4 multiplied oscillation clock (for a 4-MHz oscillation clock, 4 to 16 MHz) machine (PLL) clock
  • Select subclock behavior (8.192 kHz)
  • Minimum instruction execution time : 62.5 ns (operating with 4-MHz oscillation clock and x4 PLL clock
• 16-MByte CPU memory space
  
  • 24-bit internal addressing
  • External access possible through selection of 8/16-bit bus width (external bus mode)
• Optimum instruction set for controller applications
  
  • Wealth of data types (Bit, Byte, Word, Long Word)
  • Wealth of addressing modes (23 different modes)
  • Enhanced signed multiply-divide instructions and RETI instruction functions
  • Enhanced high-precision arithmetic employing 32-bit accumulator
• Instruction set supports high-level programming language (C) and multitasking
  
  • Employs system stack pointer
  • Enhanced indirect instructions with all pointer types
  • Barrel shift instructions
• Improved execution speed: 4-byte instruction queue
• Powerful interrupt feature: Powerful 8-level, 34-condition interrupt feature
• CPU-independent automated data forwarding: Extended intelligent I/O service feature (EI²OS) : maximum 16 channels
• Low-power consumption (Standby) Mode
  
  • Sleep mode (CPU operation clock stopped)
  • Timebase timer mode (oscillation clock and subclock, timebase timer and clock timer only operational)
  • Clock mode (subclock and clock timer only operational)
  • Stop mode (oscillation clock and subclock stopped)
  • CPU intermittent operation mode
• Process: CMOS technology
• I/O Ports: Generic I/O ports (CMOS output) : 49
• Timer
  
  • Timebase timer, clock timer, watchdog timer : 1 channel
  • 8/16-bit PPG timer : four 8-bit channels, or two 16-bit channels
  • 16-bit reload timer : 2 channels
  • 16-bit I/O timer
    
    • 16-bit free-run timer : 1 channel
    • 16-bit input capture (ICU) : 4 channels Generates interrupt requests by latching onto the count value of the 16-bit free-run timer with pin input edge detection
• CAN Controller : 1 channel
  
  • CAN specifications conform to versions 2.0A and 2.0B
  • 8 on-chip message buffers
  • Forwarding rate 10 Kbps to 1 Mbps (with 16-MHz machine clock)
• UART0 (SCI) /UART1 (SCI) : 2 channels
  
  • All with full duplex double buffer
  • Use clock-asynchronous or clock-synchronous serial forwarding
• DTP/external interrupt : 8 channels
  A module for launching extended intelligent I/O service (EI²OS) and generating external interrupts through external output
• Delayed interrupt generation module
  Generates interrupt requests for switching tasks
• 8/10-bit A/D converter : 8 channels
  
  • Switch between 8-bit and 10-bit resolution
  • Launch through external trigger input
  • Conversion time : 6.13 µs (with 16-MHz machine clock, including sampling time)
• Program batch function :
  2-address pointer ROM correction
• Clock output function

DOCUMENTATION

Note: The use of Adobe® Acrobat Reader is recommended to have all download and browsing features available for pdf files.

PDF Datasheet V3-00 (92 pages, 857 KB)

PDF Hardware Manual V5-00 (746 pages, 11831 KB)

PDF Hardware Manual Corrections X1-00 (1 page, 22 KB

PDF F2MC-16LX Standby Cancel Failure Documentation (25 pages, 422 KB)

PDF PFM package 0.65mm QFP (1 page, 49 KB)

PDF CR-package 256-pin Xmm PGA (1 page, 39 KB)