DESCRIPTION

MB90360/E Series with One channel FULL-CAN interface and Flash ROM is especially designed for automotive and other industrial applications. The devices are high-performance 16-bit micro controllers.

The power supply 3V is supplied to internal MCU core from an internal regulator circuit. This creates a major advantage in terms of EMI and power consumption.

The system, inheriting the architecture of F²MC* family, employs additional instruction ready for high-level languages, expanded addressing mode, enhanced multiply-divide instructions, and enriched bit-processing instructions.

"F²MC", an abbreviation for FUJITSU Flexible Microcontroller, is a registered trademark of FUJITSU Ltd.

FEATURES

• Clock
  
  • Built-in PLL clock frequency multiplication circuit
  • Selection of machine clocks (PLL clocks) is allowed among frequency division by two on oscillation clock, and multiplication of 1 to 6 times of oscillation clock (for 4-MHz oscillation clock, 4 MHz to 24 MHz).
  • Operation by sub-clock (up to 50kHz: 100kHz oscillation clock divided by two) is allowed.
  • Minimum execution time of instruction: 42 ns (when operating with 4-MHz oscillation clock, and 6-time multiplied PLL clock).
• Clock Monitor Function
  
  • Main clock and sub clocks are monitored independently
  • Internal CR oscillation clock can be used as sub clock(100kHZ typical)
• Instruction system best suited to controller
  
  • Wide choice of data types (bit, byte, word, and long word)
  • Wide choice of addressing modes (23 types)
  • Enhanced multiply-divide instructions and RETI instructions
  • Enhanced high-precision computing with 32-bit accumulator
• Instruction system compatible with high-level language (C language) and multitask
  
  • Employing system stack pointer
  • Enhanced various pointer indirect instructions
  • Barrel shift instructions
• Increased processing speed
  
  • 4-byte instruction queue
• Powerful interrupt function with 8 levels and 34 factors
• Automatic data transfer function independent of CPU
  
  • Expanded intelligent I/O service function (EI²OS): Maximum of 16 channels
• Low power consumption (standby) mode
  
  • Sleep mode (a mode that halts CPU operating clock)
  • Time-base timer mode (a mode that operates oscillation clock, sub clock, time-base timer and clock timer only)
  • Clock mode (a mode that operates sub clock and clock timer only)
  • Stop mode (a mode that stops oscillation clock and sub clock)
  • CPU blocking operation mode
• Process
  
  • CMOS technology
• I/O port
  
  • General-purpose input/output port (CMOS output):
  • 34 ports (devices without S-suffix)
  • 36 ports (devices without S-suffix
• Timer
  
  • Time-base timer, clock timer, watchdog timer: 1 channel
  • 8/16-bit PPG timer: 8-bit x 4 channels, or 16-bit x 2 channels
  • 16-bit reload timer: 2 channels
  • 16-bit input/output timer
  • 16-bit free run timer: 1 channel
  • 16-bit input capture: (ICU): 4 channels
  • Interrupt request is issued upon latching a count value of 16-bit free run timer by detection of an edge on pin input.
• CAN controller: 1 channel
  
  • Compliant with Ver2.0A and Ver2.0B CAN specifications.
  • 8 built-in message buffers.
  • Transmission rate of 10 Kbps to 1 Mbps (by 16 MHz machine clock)
  • CAN wake-up
• UART (LIN/SCI): Up to 2 channels
  
  • Equipped with full-duplex double buffer
  • Clock-asynchronous or clock-synchronous serial transmission is available
• DTP/External interrupt: 8 channels, CAN wakeup: 1 channel
  
  • Module for activation of expanded intelligent I/O service (EI2OS), and generation of external interrupt.
• Delay interrupt generator module
  
  • Generates interrupt request for task switching.
• /10-bit A/D converter: 16 channels
  
  • Resolution is selectable between 8-bit and 10-bit.
  • Activation by external trigger input is allowed.
  • Conversion time:3 µs (at 24-MHz machine clock, including sampling time)
• Program patch function Flash Memory Security Feature is available
  
  • Address matching detection for 6 address pointers
• Package: 48-pin plastic-LQFP

DOCUMENTATION

Note: The use of Adobe® Acrobat Reader is recommended to have all download and browsing features available for pdf files.

PDF MB90360E Data Sheet V2.00 (60 pages, 692 KB)

PDF Data Sheet V1.00 (59 pages, 624 KB)

PDF MB90360E Series Hardware Manual V2-00 (698 pages, 6.02MB)

PDF Hardware Manual V1-00 (682 pages, 12993 KB)

Parts Table

Click here to view parts table