DESCRIPTION

The MB90460 series is a line of general-purpose, Fujitsu 16-bit microcontrollers designed for process control applications which require high-speed real-time processing, such as consumer products. While inheriting the AT architecture of the F²MC(*) family, the instruction set for the F²MC-16LX CPU core of the MB90460 series incorporates additional instructions for high-level languages, supports extended addressing modes, and contains enhanced multiplication and division instructions as well as a substantial collection of improved bit manipulation instructions. In addition, the MB90460 has an on-chip 32-bit accumulator which enables processing of long-word data. The peripheral resources integrated in the MB90460 series include: an 8/10-bit A/D converter, UARTs (SCI) 0 to 1, 16-bit PPG timer, multi-functional timer (16-bit free-run timer, input capture units (ICUs) 0 to 3, output compare units (OCUs) 0 and 5, 16-bit PPG timer, waveform generator), multi-pulse generator (16-bit PPG timer, 16-bit reload timer, waveform sequencer), PWC 0 to 1, 16-bit reload timer and DTP/external interrupt.

Notes: *: F²MC stands for FUJITSU Flexible Microcontroller, a registered trademark of FUJITSU LIMITED.

FEATURES

• Minimum execution time: 62.5 ns/4 MHz oscillation (Uses PLL clock multiplication) maximum multiplier = 4
• Maximum memory space
  
  • 16 Mbyte
  • Linear/bank access
• Instruction set optimized for controller applications
  
  • Supported data types: bit, byte, word, and long-word types
  • Standard addressing modes: 23 types
  • 32-bit accumulator enhancing high-precision operations
  • Signed multiplication/division and extended RETI instructions
• Enhanced high level language (C) and multi-tasking support instructions
  
  • Use of a system stack pointer
  • Symmetrical instruction set and barrel shift instructions
• Program patch function (for two address pointers)
• Enhanced execution speed : 4 byte instruction queue
• Enhanced interrupt function
  
  • Up to eight priority levels programmable
  • External interrupt inputs: 8 lines
• Internal ROM
  
  • FLASH: 64 Kbyte (with flash security)
  • MASKROM: 64 Kbyte
• Internal RAM
  
  • EVA: 8 Kbyte
  • FLASH: 2 Kbyte
  • MASKROM: 2 Kbyte
• General-purpose ports
  
  • Up to 51 channels (Input pull-up resistor settable for: 16 channels)
• A/D Converter (RC) : 8 ch
  
  • 8/10-bit resolution selectable
  • Conversion time: 6.13 µs (Min.) , 16 MHz operation
• UART : 2 channels
• 16 bit PPG : 3 channels
  
  • Mode switching function provided (PWM mode or one-shot mode)
  • Can be worked with multi-functional timer, multi-pulse generator or individually
• 16 bit reload timer: 2 channels
  
  • Can be worked with multi-pulse generator or individually
• 16-bit PWC timer: 2 channels
• Multi-functional timer
  
  • Input capture : 4 channels
  • Output compare with selectable buffer : 6 channels
  • Free run timer with up or up/down mode selection and selectable buffer: 1 channel
  • 16-bit PPG : 1 channel
  • Waveform generator : (16-bit timer: 3 channels, 3-phase waveform or dead time)
• Multi-pulse generator
  
  • 16-bit PPG : 1 channel
  • 16-bit reload timer : 1 channel
  • Waveform sequencer : (16-bit timer with buffer and compare clear function)
• Time-base counter/watchdog timer: 18-bit
• Low-power consumption mode :
  
  • Sleep mode
  • Stop mode
  • CPU intermittent operation mode
• Package:
  
  • QFP-64 (FPT-64P-M09 : 0.65 mm pitch)
  • QFP-64 (FPT-64P-M06 : 1.00 mm pitch)
  • SDIP-64 (DIP-64P-M01 : 1.78 mm pitch)
• CMOS technology

DOCUMENTATION

Note: The use of Adobe® Acrobat Reader is recommended to have all download and browsing features available for pdf files.

PDF Datasheet V1-00 (85 pages, 828 KB)

PDF Hardware Manual V2-00 (716 pages, 16999 KB)

PDF PFM package 0.65mm QFP (1 page, 49 KB)

PDF PF package 1mm QFP (1 page, 80 KB)

PDF P-SH package 1.778mm DIP: MB89850 (1 page, 64 KB)

PDF CR-package 256-pin Xmm PGA (1 page, 39 KB)