DEVICES

MB90F351(S), MB90F351A(S), MB90F351TA(S), MB90F356A(S), MB90F356TA(S), MB90F357A(S), MB90F357TA(S), MB90351A(S), MB90351TA(S), MB90356A(S), MB90356TA(S), MB90357A(S), MB90357TA(S)

DESCRIPTION

The MB90350-series with one FULL-CAN interface (MB90V340: 2ch) and FLASH ROM is especially designed for automotive and industrial applications. Its main feature is the on board CAN Interface, which conforms to V2.0 Part A and Part B, while supporting a very flexible message buffer scheme and so offering more functions than a normal full CAN approach.

With the new 0.35 µm CMOS technology, Fujitsu now offers on-chip FLASH-ROM program memory up to 128 Kbytes. An internal voltage booster removes the necessity for a second programming voltage. An on board voltage regulator provides 3 V to the internal MCU core. This creates a major advantage in terms of EMI and power consumption. The internal PLL clock frequency multiplier provides an internal 42 ns instruction cycle time from an external 4 MHz clock. The unit features an 4 channel Output Compare Unit and 6 channel Input Capture Unit with two separate 16-bit free running timers. 2 UARTs (MB90V340: 3 UARTs) constitute additional functionality for communication purposes.: 3 UARTs) constitute additional functionality for communication purposes.

FEATURES

• 16-bit core CPU; 4 MHz external clock (24 MHz internal, 42 ns instr. cycle time)
• New 0.35 µm CMOS Process Technology
• Internal voltage regulator supports 3 V MCU core, offering low EMI and low power consumption figures
• One FULL-CAN interface (MB90V340: 2ch); conforming to Version 2.0 Part A and Part B, flexible message buffering (mailbox and FIFO buffering can be mixed)
• Powerful interrupt functions (8 progr. priority levels; 8 external interrupts)
• EI2OS - Automatic transfer function indep.of CPU; 16 ch. of intelligent I/O Services
• µDMA
• 18-bit Time-base counter
• Watchdog Timer
• 2 full duplex UARTs (SCI/LIN) (MB90V340: 3 UARTs)
• One ch I2C with 400 kbit/s (devices with C-suffix)
• A/D Converter : 15 ch. analog inputs (Resolution 10 bits or 8 bit, conversion time 3µs)
• 16-bit reload timer ×4 ch
• ICU (Input capture) 16 bit x6 ch
• OCU (Output compare) 16 bit ×4 ch
• 16-bit free running timer ×2 ch (FRT0 : ICU 0/1, FRT1 : ICU 4/5/6/7, OCU 4/5/6/7)
• 8/16-bit Programmable Pulse Generator 6ch×16-bit / 10ch×8-bit (MB90V340: 8ch×16bit / 12ch×8bit)
• Optimized instruction set for controller applications (bit, byte, word and long-word data types; 23 different addressing modes; barrel shift; variety of pointers)
• 4-byte instruction execution queue
• Signed multiply (16 bit×16 bit) and divide (32 bit/16 bit) instructions available
• Program Patch Function
• Fast Interrupt processing
• Low Power Consumption - 10 different power saving modes : (Sleep, Stop, CPU intermittent mode, ...)
• 32 kHz Subsytem Clock (devices without S-suffix)
• External bus interface
• Programmable input levels (Automotive / CMOS-Schmitt (initial level is Automotive), for external bus also TTL level)
• Packages : 64-pin plastic QFP, 64-pin plastic LQFP

Note:
Controller Area Network (CAN) - License of Robert Bosch GmbH

DOCUMENTATION

Note: The use of Adobe® Acrobat Reader is recommended to have all download and browsing features available for pdf files.

PDF Datasheet V3-00 (85 pages, 964 KB)

PDF MB90350E Datasheet V1-00 (74 pages, 734 KB)

PDF MB90350E Series Hardware Manual V3.0 (9.32 MB)

PDF Hardware Manual V1-00 (646 pages, 12052 KB)

PDF MB90350E Series Hardware Manual Addendum (30 KB)

PDF F2MC-16LX Standby Cancel Failure Documentation (25 pages, 422 KB)

PDF PFM package 0.65mm QFP (1 page, 49 KB)

PDF CR-package 299-pin Xmm PGA (1 page, 33 KB)

Parts Table

Click here to view parts table