MB95200 Series: MB95F202KP-G-SH-SNE2

• Product Features
• Block diagram
• Feature summary
• Documentation
• Starter Kit
• BGMA Manual
• ROM（Flash）Programming Tools
• Development Environment
• Application Note and Sample Code

Product Features

MB95200H/210H is a series of general-purpose, single-chip microcontrollers. In addition to a compact instruction set, the microcontrollers of this series contain a variety of peripheral resources.

Note: F2MC is the abbreviation of FUJITSU Flexible Microcontroller.

MB95200/210 FEATURES

• F2MC-8FX CPU core Instruction set optimized for controllers
  
  • Multiplication and division instructions
  • 16-bit arithmetic operations
  • Bit test branch instructions
  • Bit manipulation instructions, etc.
• Clock
  
  • Selectable main clock source
    Main OSC clock (up to 16.25 MHz, maximum machine clock frequency: 8.125 MHz); External clock (up to 32.5 MHz, maximum machine clock frequency: 16.25 MHz)
    Sub-OSC clock (32.768 kHz); External clock (32.768 kHz)
  • Selectable subclock source
    Main internal CR clock (1/8/10 MHz ± 3%, maximum machine clock frequency: 10 MHz)
    Sub-internal CR clock (typ: 100 kHz, min: 50 kHz, max: 200 kHz)
• Timer
  
  • 8/16-bit composite timer
  • Time base timer
  • Watch prescaler
• LIN-UART
  
  • Full duplex double buffer
  • Capable of clock-synchronized serial data transfer and clock-a synchronized serial data transfer
  • External interrupt
  • Interrupt by edge detection (rising edge, falling edge, and both edges can be selected)
  • Can be used to wake up the device from different low-power consumption (standby) modes
• 8/10-bit A/D converter
  
  • 8-bit or 10-bit resolution can be selected.
  • Low power consumption (standby) mode
  • Stop mode
  • Sleep mode
  • Watch mode
  • Time base timer mode
• I/O port (max: 17)
  
  • General-purpose I/O ports (max):CMOS I/O: 15, N-ch open drain: 2
• On-chip debug
  
  • 1-wire serial control
  • Serial writing supported (asynchronous mode)
  • Hardware/software watchdog timer
  • Built-in hardware watchdog timer
• Low-voltage detection reset circuit
  
  • Built-in low-voltage detector
• Clock supervisor counter
  
  • Built-in clock supervisor counter function
• Programmable port input voltage level
  
  • CMOS input level / hysteresis input level
• Flash memory security function
  
  • Protects the contents of flash memory

Block diagram

Application Note and Sample Code