Frequently Asked Questions
The "Check" lamp lights when powering up the scanner.
When your scanner has the Flatbed, please make sure that the Shipping lock is in the unlock position. Refer to the Operator's guide to see how to remove the shipping lock. If the Check lamp still lights after removing the shipping lock, please contact the Fujitsu subsidiary which you purchased the scanner from.
Note:
When using fi-4340C or fi-4220C2, please turn the lock dial to the unlock position. Please refer to the figures below.
fi-4340C
Turn the Shipping lock 90 degrees in anticlockwise direction.
fi-4340C
Tilt the scanner body approx. 30 degrees and slide the Shipping lock to the unlock position.
