Fujitsu Microelectronics Asia Pte Ltd

Fujitsu Launches World’s First 1394 Automotive IC for HD Video

Contributes to reduced costs, lighter wiring harness, and higher fuel efficiency

Singapore, April 23, 2009  — Fujitsu Microelectronics Asia Pte Ltd (FMAL) today announced the world’s first “1394 Automotive” (IDB-1394)(*1) controller IC that realizes high-definition (HD) (1,280 dots x 720 lines) video transmission over the IDB-1394 in-vehicle multimedia network protocol. The new IC, the MB88395, can simultaneously transmit multiple streams around the vehicle, such as HD video from Blu-Ray DVDs, digital TV, audio and car navigation images. The new IC realizes this by utilizing a high-speed 800Mbps physical layer (*2) as well as Fujitsu’s proprietary SmartCODEC that provides high compression and which can transmit HD video without perceptible lag. This not only brings the rich HD experience to rear-seat entertainment, but reduces the system cost of in-vehicle multimedia networks by a maximum of 30%, while reducing the number of wire harnesses (cables) by a maximum of 70% to reduce vehicle weight and improve fuel efficiency. Sample shipment of the new MB88395 will begin from April 22, 2009.

There is increasing attention being paid to 1394 Automotive for in-vehicle multimedia networking, and it is expected to become common in the automotive market. The reason for this includes the gradual shift to digital TV in each country, the increased availability of HD content, as well as the analog output from Blu-Ray players to be stopped from 2013, making 1394 Automotive necessary for the upcoming flood of digital transmissions through in-car networks. Anticipating the future needs for rear-seat entertainment systems, Fujitsu Microelectronics lead other vendors in introducing 1394 Automotive controllers in 2005, and with this new 1394 controller co-developed with Fujitsu VLSI Limited, allows more HD video content to be easily and flexibility viewed throughout the vehicle.

This was emphasized by Yuji Kawaguchi, Operating Officer of Honda R&D Co., Ltd. in saying, “Honda R&D welcomes the MB88395, the first IC to provide the 800Mbps speeds of the 1394 Automotive spec. The importance of high-speed digital transmissions will increase further in the future to handle in-vehicle multimedia as well as to reduce weight. 1394 Automotive is an in-vehicle network that can enrich entertainment and comfort. We plan to promptly evaluate the MB88395.”

The key to the capabilities of the new controller are the physical layer compliant with the 800Mbps specification of 1394 Automotive - double the 400Mbps of the previous product - as well the a version of the SmartCODEC compression codec for video that has an even higher compression ratio, compressing video to one-fourth (1/4) it’s original size, compared to one-third (1/3) that of the previous product. The SmartCODEC, which was developed by Fujitsu Laboratories and is used in the BT.601 Transport Over IEEE-1394(*3) standard, can compress and decompress high resolution video in 2 to 3 milliseconds(2-3ms) without any perceptible annoying time lag or out of sync contents, which can be a problem when watching the same contents on the front and rear monitors.

This results in the ability to transmit HD video from Blu-Ray DVDs and digital TV, as well as high-resolution navigation images, within the vehicle without any perceptible time lag, making this the first IC in the world to allow multiple streams of HD video and navigation images over 1394 Automotive. For example, a HD video stream (1,280 dots x 720 lines) from a Blu-Ray DVD that has been decompressed has a rate of 885Mbps. With subsequent compression to one-fourth (1/4) with SmartCODEC, the rate becomes 249Mbps, so two (2) channels can be transmitted in the 800Mbps bandwidth that was not possible over 400Mbps products.

Going forward, Fujitsu Microelectronics plans to expand its lineup of 1394 Automotive ICs to handle the increasing information streams in automobiles, such as video content and peripheral cameras on the vehicle, as well as to drive further reductions in system costs. These in-vehicle networking chips complement Fujitsu Microelectronics’ strong presence in automotive ICs for processing graphics and video.

Key Features

1. Reduces system costs for rear-seat entertainment
   The MB88395 IC includes the 1394 Automotive physical layer and link layer(*4) as well as DTCP digital rights management(*5) on one chip, while encoding occurs only within SmartCODEC’s internal line memory, making an external frame buffer unnecessary, and thus reducing the necessary system components and total multimedia network system costs by a maximum of 30%. Also, by being able to simultaneously transmit at high speed several video and audio streams as well as control signals on one network line - not peer-to-peer - it reduces the number of the wire-harnesses (cables) by a maximum of 70%. This contributes to reducing vehicle weight, leading to higher fuel efficiency. Concretely, this can produce a reduction in the environmental impact by approximately 10kg of CO2 per year for a car traveling 10,000km (that translates into roughly the amount of CO2 a tree absorbs in 1 year).
2. HD video compression, decompression and transmission without perceptible time lag
   Includes Fujitsu’s proprietary SmartCODEC which can compress video data to one-fourth in size, an improvement compared to the one-third of the previous product, and compress and decompress video within 2-3 milliseconds. Such low latency, combined with the doubling of the speed of the physical layer to 800Mbps, allows transmission of HD video from Blu-Ray DVDs and digital TV, within the vehicle without any perceptible time lag, which can be a problem when watching the same contents on the front and rear monitors. With an MPEG CODEC, there would be a perceptible time lag in transmission.

Glossary and Notes

*1. 1394 Automotive (IDB-1394): Stands for “ITS Data Bus-1394.” An automotive network protocol for high-speed multimedia applications promulgated by the 1394 Trade Association’s Automotive Working Group. With the IDB Forum absorbed into the 1394 Trade Association, “IDB-1394” has been re-branded as “1394 Automotive” or ”1394 Auto”.

*2. Physical layer: The first of seven layers when transmission functions are divided into seven layers, as defined by the OSI Reference Model. A key part of network hardware through which bit arrays are transmitted.

*3. BT.601 Transport Over IEEE-1394: A transport protocol for sending BT.601 video streams (YUV, RGB, etc.) over IDB-1394, promulgated by the 1394 Trade Association.

*4. Link layer: The second layer in the OSI Reference Model, in which packets are formed and transport is managed.

*5. DTCP: Digital Transmission Content Protection. An encryption protocol that prevents unauthorized duplication, download or alteration of audio or visual media.

Attachment

PDF Key Specifications of the MB88395 1394 Automotive IC

---

About Fujitsu Microelectronics Asia Pte Ltd (FMAL)

Fujitsu Microelectronics Asia Pte Ltd was established as the Asia Pacific Headquarters of Fujitsu Limited Electronic Devices Group in 1986. It provides support, sales and marketing of semiconductors and electronic devices to the Asia Pacific region, including India and Oceania. Fujitsu Microelectronics Asia offers a wide and varied product range like ASIC, ASSPs, Microcontrollers / Microprocessors (FR-V), System Memory (FRAM / FCRAM) and System LSIs (DVD MPEG Source Decoders / MPEG –2 Encoders).

About Fujitsu Microelectronics Limited

Fujitsu Microelectronics Limited designs and manufactures semiconductors, providing highly reliable, optimal solutions and support to meet the varying needs of its customers. Products and services include ASICs/COT, ASSPs, power management ICs, and flash microcontrollers, with wide-ranging expertise focusing on imaging, wireless, automotive and security applications. Fujitsu Microelectronics also drives power efficiency and environmental initiatives. Headquartered in Tokyo, Fujitsu Microelectronics Limited was established as a subsidiary of Fujitsu Limited on March 21, 2008. Through its global sales and development network, with sites in Japan and throughout Asia, Europe, and the Americas, Fujitsu Microelectronics offers semiconductor solutions to the global marketplace. For more information: http://jp.fujitsu.com/fml/en/

---

Press Contacts

---

All company or product names referenced herein are trademarks or registered trademarks of their respective owners. Information provided in this press release is accurate at time of publication and is subject to change without advance notice.