All Subsidiaries | Fujitsu Asia | Fujitsu Microelectronics Asia | Fujitsu PC Asia Pacific | Fujitsu Components Asia |
Fujitsu Components Asia Pte Ltd
- 25 October 2004 Singapore
- Fujitsu Develops World’s First Ultra Wide Band Ring Filter; UWB Plane Antenna with World’s Highest-Class Characteristics Per
Unit Area
Singapore, October 25, 2004 – Fujitsu Component Ltd. [Head Office: 2-3-5 Higashi Gotanda, Shinagawa-ku, Tokyo, Capital: 2,764 Million ¥, President: Tozo Ono ] announced at the IEIEC Society Conference, held in Tokushima, Japan, September 21-24, that it has developed the world’s first UWB (Ultra Wide Band) ring filter capable of being pattern-formed onto a printed circuit board .
- 19 October 2004 Singapore
- Fujitsu Adds Differential Right-Angle Copper Connector For High-Speed Coplanar and Perpendicular System Expansion
Singapore, October 19, 2004 – Fujitsu Components Asia, Limited today expanded the packaging options of its internal microGiGaCN™ (FCN-260) mezzanine connector offering by releasing a high-speed differential signal, right-angle SMT plug connector.
- 11 October 2004 Singapore
- Fujitsu’s New Cat5 Extender Enables Remote KVM Switch Access Up to 200m over Cable
Singapore, October 11, 2004 – Fujitsu Components Asia, Limited today announced the release of its Servis™ Cat5 Extender system that allows a host system’s KVM switch to be operated by a remote console with audio support at distances up to 200m away using a Category 5 UTP cable.
- 4 October 2004 Singapore
- Fujitsu Receives Sun’s "Best in Class" Award
Singapore, October 4, 2004 – Citing "exceptional performance in delivering the best customer value and highest product quality," Sun Microsystems Inc., presented Fujitsu Components Asia, Limited, with a Best in Class award for Sun’s fiscal year 2004.
- 4 October 2004 Singapore
- Fujitsu’s New 3-inch Thermal Printer Mechanism With Auto Cutter Is Smallest in Product Line
Singapore, October 4, 2004 – Fujitsu Components Asia, Limited today released its smallest, 24-volt, 3-inch print mechanism with integrated cutter. Developed to assist OEMs design smaller and lighter products with print functionality, targeted applications for the printer include POS terminals, banking terminals, and measurement and medical equipment.
- 7 June 2004 Singapore
- Fujitsu Introduces New 20A Slim Relay for HVAC and Major Appliances
Singapore, June 7, 2004 – Fujitsu Components America, Inc., today released a slim, 20A power relay that is targeted primarily to OEMs developing commercial and industrial products.
- 25 May 2004 Singapore
- Fujitsu Announces Production Schedule and North American Marketing Efforts for Industry’s First Conductive Polymer Film Touch
Panels
Singapore, May 25, 2004 – Fujitsu Components Asia, Limited today announced it will begin North American marketing efforts for new resistive touch panels that use an extremely durable conductive polymer film and cost less to produce than conventional resistive touch panels. An industry-first technology developed by Fujitsu Laboratories Ltd. and Fujitsu Component Limited, the custom touch panels will start sampling in early 2006 with production following in Q2 2006.
- 24 May 2004 Singapore
- Fujitsu Begins Producing Plastic Touch Panels for Mobile Products
Singapore, May 24, 2004 – Fujitsu Components Asia, Limited today announced the availability of ultra-thin, lightweight, flexible and rigid touch panels for mobile applications. The full-custom touch panels use plastic film substrates to reduce weight, improve durability and provide a wider operating temperature range than traditional film-glass touch panels.
- 11 May 2004 Singapore
- Fujitsu Introduces Optical Transceiver Module with Media Converter that Provides Low-Cost Support for VSR Parallel Optics
in Network/Server Markets
Singapore, May 11, 2004 – Fujitsu Components Asia, Limited, today released a 4-channel optical transceiver module that uses an internal media converter to extend the signal transmission reach of a copper interface up to 300m at 2.5Gb/s or 100m at 3.125Gb/s over multimode fiber (MMF) ribbon cable. Using the Fujitsu optical module, IT managers have the flexibility to implement either a copper or an optical solution using one low-cost copper I/O interface.
- 11 May 2004 Singapore
- Fujitsu Releases X2 Copper Transceiver Module for 10Gbit-CX4 Ethernet Applications
Singapore, May 11, 2004 – Fujitsu Components Asia, Limited, today announced the release of a copper electrical transceiver module compliant with the X2 multi-source agreement (MSA) specification Rev. 1.0b. The X2 x-mGC module transmits 10Gb/s Ethernet over 20m of standard InfiniBand copper cable (AWG24) or VSR parallel optics through a single port, offering a cost-effective, standards-compliant product targeted for multiple applications in 10Gb/s enterprise, storage, and telecom markets. Using the imbedded media detect circuit, transmission up to 300 meters over standard multi-mode can also be achieved using Fujitsu’s o-MGC optical media converter.
- 3 May 2004 Singapore
- Fujitsu Brings to Market Copper XENPAK Module for Network/Server Markets
Singapore, May 3, 2004 – Fujitsu Components Asia, Limited today released a copper XENPAK module (xMGC) that conforms to the new 10GBASE-CX4 specification (IEEE 802.03ak/D4.2) for low-cost 10-Gigabit copper Ethernet. The new module reduces the cost per port by offering a low-cost copper solution that has the flexibility to support VSR parallel optics through a single port.
- 26 April 2004 Singapore
- Fujitsu Enhances Compact Printer Unit for High-Capacity Kiosk Applications
Singapore, April 26, 2004 – Fujitsu Components Asia, Limited has enhanced its high-capacity thermal printer assembly with more standard features and print capabilities for expanded use in various self-service, informational, and transaction kiosk applications.
- 20 April 2004 Singapore
- Fujitsu Expands its 7-Wire Touch Panel Offering
Singapore, April 20, 2004 – Fujitsu Components Asia, Limited today announced it has expanded its 7-wire resistive touch panel offering with the addition of a 17-inch (diagonal) standard product. The company now offers OEMs and VARs a line of standard 7-wire touch panels ranging in size from 8.4 inches to 17 inches.
- 5 April 2004 Singapore
- Fujitsu Expands Copper Connector Offering for High-Speed Switching Applications
Singapore, April 5, 2004 – Fujitsu Components Asia, Limited today announced it has expanded its high-speed copper microGiGaCN™ connector series by adding a vertical board-mount I/O socket. The new socket expands Fujitsu’s offering of standard, copper I/O and mid-plane interconnects that comply with InfiniBand®, 10G CX4 Ethernet, and 10G Fiber Channel requirements while meeting the needs of other high-speed applications. For distances less than 20m, the microGiGaCN series provides a low-cost alternative to optical fiber.
- 30 March 2004 Singapore
- Fujitsu Releases Semi-Rugged Standalone Printer for Mobile Applications
Singapore, March 30, 2004 – Fujitsu Components Asia today released a semi-rugged, mobile thermal printer unit with a Bluetooth® interface for handheld, portable and wireless applications.
