The fi-4860C2 is capable of scanning up to an impressive 60 pages (120 images) (*1) per minute in both monochrome and color. In addition to being fast, its ability to scan up to 500 sheets per batch makes the fi-4860C2 ideal for digitizing massive volumes of data.
(*1) Applicable for duplex scanning of A4 documents in color, at 200dpi, using JPEG compression.
TWAIN supporting drivers are available as web downloads.
|Technical Specifications||Accessories, option, Consumables, Cleaning Tool|
Now bundled with Kofax VRS (Virtual ReScan) Professional for Production
Now, the newly bundled Kofax VRS Professional lets users do what they could always do with the VRS Basic as well as:
VRS Professional for Production
|Scanner Type||ADF (Automatic Document Feeder) + Manual Feed|
|Scanning modes||Simplex / Duplex, Color / Grayscale / Monochrome|
|Image Sensor Type||Color CCD (Charge-Coupled Device) x 2|
|Light Source||White fluorescent lamp|
|Scanning range||Maximum : A3 (portrait) (297mm x 420mm or 11in x 17in)
Minimum : (74mm x 74mm or 3in x 3in)
|Paper weight (Thickness)||52g/m2 to 127g/m2 (14lb to 34lb) (31g/m2 to 127g/m2 (8lb to 34lb)) *1|
|Scanning speed *2||Color *3||[A4 Landscape]
Simplx: 74ppm (200dpi)
Duplex: 148ipm (200dpi)
Simplx: 60ppm (200dpi)
Duplex: 120ipm (200dpi)
|Paper chute capacity *4||500sheets (A4: 80g/m2 or 20lb)|
|Background colors||Black / White (switchable on command)|
|Output resolution *5||Color (24 bit)||100, 150, 200, 300, 400 dpi|
|Grayscale (8 bit)||100, 150, 200, 240, 300, 400 dpi|
|Monochrome (1 bit)|
|Output format||Color: 24 bit, Grayscale: 8bit, Monochrome: 1bit|
|AD converter||1024 levels (10bit)|
|Interface||Ultra Wide SCSI (SE)|
|Connector shape||Shield type 68pin (pin type)|
|Output mode (half-tone)||Dither / Error diffusion|
|Voltage or voltage range||AC 100 to 240V, +10% / -10%|
|Power||Operating: 200W or less (Sleep mode: less than 12W)|
|Operational environment||Temperature: 15 to 35°C (59 to 95°F)
Relative humidity: 20 to 80% (Non-condensing)
|Dimensions: Width x Depth x Height *6||520mm x 431mm x 523mm (20.5in. x 17in. x 20.6in.)|
|Included drivers||TWAIN, ISIS™ *7|
|Environmental compatibility||RoHS *8|
|Others||Multi feed detection||Yes (Standard) ultrasonic multi-feed detection sensors|
|Long paper scanning *9||878mm (34.5in)|
*1 Scannable paper weights when using the fi-4860C2´s thin paper kit option (fi-486TRK).
*2 Actual scanning speeds are affected by data transmission and software processing times.
*3 JPEG compressed figures.
*4 Maximum capacity varies, depending upon paper weight.
*5 Maximum output resolutions may vary, depending upon the size of the area being scanned and whether the scanner is scanning in simplex or duplex.
*6 Actual unit size. ADF paper chute and stacker have been excluded.
*7 ISIS™ does not support Windows 95.
*8 PFU Limited, a Fujitsu company, has determined that this product meets RoHS requirements (2005 / 95 / EC).
*9 The fi-4860C2 is capable of scanning documents that exceed A3 sheets in length.
|2||User Manual CD-ROM||1|
|4||Adobe® Acrobat® CD-ROM||1|
|6||FUJITSU TWAIN Installation Guide||1|
|7||FUJITSU ISIS™ Installation Guide||1|
|8||VRS Installation CD-ROM||1|
|PA03296-D207||The imprinter option enables users to print information on original documents for document management purposes. While the fi-486PRFR (pre imprinter) prints information on the front of documents prior to scanning, the fi-486PRRE (post imprinter) prints information of the back of the original documents after they have been scanned.
Although both the fi-486PRFR and the fi-486PRRE may be attached to the same scanner unit, both imprinters cannot be used simultaneously.
|3||Thin paper kit
|PA03296-D780||The thin paper kit expands the range of documents that the fi-4860C2 is capable of scanning. (From 31g/m2 to 52g/m2)|
Recommended replacement cycle
The replacement cycle is based on 64g/m2 A4 plain paper.
This may vary depending on the paper type or condition.
|1||Cleaner F1||Daily cleaning use for pads and pick rollers|
|2||Cleaner F2||Daily cleaning use for metal roller and parts|
|3||Cleaning sheet||Daily cleaning use for all rollers|
|4||Cleaning paper||Daily cleaning use for all rollers
Use this paper with "Cleaner F1"
|5||Cleaning wipe||Daily cleaning use for all rollers
Use this paper with "Cleaner F1"
Do not use aerosol sprays near the scanner.
Do not use any aerosol sprays or alcohol based sprays to clean the scanner. Dust blown up by strong air from the spray may enter the inside of the scanner. This may cause the scanner to fail or malfunction. Sparks, caused by static electricity, generated when blowing off dust and dirt from the outside of the scanner may cause a fire.
Deel deze pagina via