Archived content
NOTE: this is an archived page and the content is likely to be out of date.
Precautions when using Windows Server 2012 R2
Date: March 29, 2017
| Applied to | Precautions | Date |
|---|---|---|
| Dual Channel 10Gbps Converged Network Adapter
【MC-0JCE61 / MCX0JCE61 / MC-0JCE62】 Dual Channel 40Gbps Converged Network Adapter 【MC-0JCE91 / MCX0JCE91 / MC-0JCE92】 |
If external disks are connected by CNA(Converged Network Adapter), the memory dump file creation in the blue screen remains at zero percent, so you cannot complete the processing of the memory dump file creation. This phenomenon can be avoided by downloading the Windows driver kit (v11.1.172.19 and later) for this CNA from the web and applying it. |
March 29, 2017 |
| PRIMEQUEST 2800E / 2800E2/ 2800E3 / 2800B / 2800B2 /2800B3 (Server) | Due to the combination of value to [ACPI MSCT] and hardware partition with SB configuration, bule screen(0x7e) may be dsiplayed. This can be avoided by applying patch : "KB3032331". Please visit the Microsoft web site for detail information.
The combination of [CPU Configuration]-[ACPI MSCT] in UEFI menu and partition with SB configuration is as below.
|
September 18, 2015 |
| PRIMEQUEST (Server) | Event Log may record the following error in a high-workload.
Log name: System Source:IPMIDRV Event ID:1004 Description: The IPMI device driver attempted to communicate with the IPMI BMC device during normal operation. However the communication failed due to a timeout. You can increase the timeouts associated with the IPMI device driver. This can be avoided by increasing the timeouts and applying patch: "KB3140219".
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\IPMI Name: CommandWaitTimeoutPeriod Data Type: REG_DWORD Data Value(hexadecimal): 3938700
|
July 6, 2015 |
| PRIMEQUEST 2800E2 / 2800B2 (Server) | When using the server on hardware partition with 4SB, you may not be able to apply patch.
This can be avoided by modifying following registry subkey. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet \services\TrustedInstaller Name: BlockTimeIncrement Data Type: REG_DWORD Data Value(hexadecimal): 2a30 Please visit the Microsoft web site for detailed information. |
June 2, 2015 |
| PRIMEQUEST (Server) | Under the iSCSI boot, blue screen(0x7f) may be displayed. This can be avoided by applying patch : "KB2919355".
Please visit the Microsoft web site for detail information. |
July 8, 2014 |
| PRIMEQUEST (Server) | When using Windows Server 2012 R2 of Full Packaged Product, apply KB2883200.
Please visit the Microsoft web site for detail information. In addition, KB2883200 is included in KB2919355. Please visit the Microsoft web site for detail information. |
April 10, 2014 |
| PRIMEQUEST (Server) | Due to Ipmidrv.sys issue for Windows Server 2012 R2, blue screen(0x7e) may be displayed. This problem may happen once out of 30 or 40 times. This can be avoided by applying patch : "KB2919355".
Please visit the Microsoft web site for detail information. |
April 10, 2014 |
| PRIMEQUEST (Server) | Windows Event Log may be logged after installation of Windows Server 2012 R2 by the Enable kit through it has been authenticated in the System Properties or slmgr commnd.
Log Name:Application Source:Security-SPP Event ID:1058 Description:Installation of the Proof of Purchase from the ACPI table failed. Error code: 0xC004F057 Such event log recording does not affect the system. Please visit the Microsoft web site for detailed information. |
April 10, 2014 |
| PRIMEQUEST (Server) | For Explore.exe issue, Event Log may record the following error at a system shut down.
explore.exe - Application Error - The instruction at The memory could not be " Click on OK to terminate the program. Such event log recording does not affect the system. Please visit the Microsoft web site for detailed information. |
April 10, 2014 |
| PRIMEQUEST (Server) | Windows RE(Windows Recovery Environment) may start when the problem occurs at a system boot for Windows.
After Windows RE menu is displayed, click [Continue] restart the system. If you don't want to start Windows RE you can prevent start of Windows RE by REAgentC.exe /disable command. Please visit the Microsoft website for detailed information. |
March 29, 2017 |
| PRIMEQUEST (Server) | When trying to setup a paging file on one physical partition that is equal to or larger than 2 terabytes (TB) of memory, you may receive the following warning message.
Drive X: is too small for the maximum paging file size specified. Please enter a smaller number. Please visit the Microsoft web site for detailed information. |
April 10, 2014 |
| PRIMEQUEST (Server) | Event Log may record the following error at a system boot.
Log name:System Source:Application Popup Event ID:56 Description: Driver PCI returned invalid ID for a child device (xxx). Such event log recording does not affect the system. |
April 10, 2014 |
| PRIMEQUEST (Server) | Event Log may record the following error at the Windows Server Backup Start.
Log Name:System Source:disk Event ID:157 Description:Disk x has been surprise removed. Such event log recording does not affect the system. |
April 10, 2014 |
| PRIMEQUEST (Server) | Event Log may record the following error at the Windows Server Backup Start under the iSCSI connection.
Log Name:MSiSCSI Source:MSiSCSI Event ID:108 Description:Status 0x00001069 determining that device interface \\?\{8e7bd593-6e6c-4c52-86a6-77175494dd8e}#MsVhdHba#1&3030e83&0&01#{2accfe60-c130-11d2-b082-00a0c91efb8b} does not support iSCSI WMI interfaces. If this device is not an iSCSI HBA then this error can be ignored Such event log recording does not affect the system. |
April 10, 2014 |
| PRIMEQUEST (Server) | Event Log may record the following error at the Performance Monitor start.
Log Name:Application Source:Microsoft-Windows-Perflib Event ID:1008 Description:The Open Procedure for service ""BITS"" in DLL ""C:\Windows\System32\bitsperf.dll"" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code. This problem occurs when BITS (Background Intelligent Transfer Service) has been never started. The error is not recorded if BITS starts by manual operation or Windows Update starts. |
April 10, 2014 |
Please update or install the latest drivers for all devices.
Related Information
01235 797711
Connect with us via
