GTM-MQNC2Z4
Skip to main content

FUJITSU TWAIN32 Version 9.21.1600


Supported Scanner Models

  • fi-5530C2

OS

  • Microsoft® Windows® 2000 Professional
  • Microsoft® Windows® XP Home Edition (32-bit)
  • Microsoft® Windows® XP Professional (32-bit / 64-bit)
  • Microsoft® Windows Server® 2003 Standard Edition (32-bit / 64-bit)
  • Microsoft® Windows Server® 2003 R2, Standard Edition (32-bit / 64-bit)
  • Microsoft® Windows Vista® Home Basic (32-bit / 64-bit)
  • Microsoft® Windows Vista® Home Premium (32-bit / 64-bit)
  • Microsoft® Windows Vista® Business (32-bit / 64-bit)
  • Microsoft® Windows Vista® Enterprise (32-bit / 64-bit)
  • Microsoft® Windows Vista® Ultimate (32-bit / 64-bit)
  • Microsoft® Windows Server® 2008 Standard (32-bit / 64-bit)
  • Microsoft® Windows Server® 2008 R2 Standard (64-bit)
  • Microsoft® Windows® 7 Home Premium (32-bit / 64-bit)
  • Microsoft® Windows® 7 Professional (32-bit / 64-bit)
  • Microsoft® Windows® 7 Enterprise (32-bit / 64-bit)
  • Microsoft® Windows® 7 Ultimate (32-bit / 64-bit)
  • Microsoft® Windows® 8 (32-bit / 64-bit)
  • Microsoft® Windows® 8 Pro (32-bit / 64-bit)
  • Microsoft® Windows® 8 Enterprise (32-bit / 64-bit)
  • Microsoft® Windows Server® 2012, Standard (64-bit)
  • Microsoft® Windows® 8.1 (32-bit / 64-bit)
  • Microsoft® Windows® 8.1 Pro (32-bit / 64-bit)
  • Microsoft® Windows® 8.1 Enterprise (32-bit / 64-bit)
  • Microsoft® Windows Server® 2012 R2, Standard (64-bit)
  • Microsoft® Windows® 10 Home (32-bit / 64-bit)
  • Microsoft® Windows® 10 Pro (32-bit / 64-bit)
  • Microsoft® Windows® 10 Enterprise (32-bit / 64-bit)
  • Microsoft® Windows® 10 Education (32-bit / 64-bit)

Contents of change

Version 9.21.1600

Corrected issues:

  • Fixed the issue where an application error might occur when the driver received both DisableDS and CloseDS before receiving OpenDS from an application on Windows8.1 or later.
  • Fixed the issue where a gamma pattern parameter specified for any of the following image types might be also applied to the other image types: binary, gray, or color
  • Fixed the issue where an application error might occur when the TWAIN driver was used while six or more units of fi Series scanners were being connected.

Version 9.21.1509

Corrected issues:

  • Fixed the defect that the driver is not available until the OS is rebooted when the driver ended abnormally because of communication error, etc. in the Thin Client environment during scanning.
  • Fixed the defect that the application does not informed of the correct size of image when [Rotation degree: Automatic] or [Automatic Page Size Detection] is selected and scanning in the Memory Transfer mode on the flatbed scanner.
  • Fixed the defect that error occurs when “CAP_PRINTER” is issued by the scanner equipped with the imprinter.
  • Fixed the defect that [Blank Page Skip] is disabled when “CAP_AUTOSCAN” is issued.
  • Fixed the defect that the driver hangs up when it is closed in the middle of scanning with documents still left on the ADF paper chute.
  • Fixed the defect that the Software Operation Panel hangs up when it is launched while the driver is being used.

Driver download and installation

Download the driver to your hard disk by clicking the "Download" link below.

This driver version supports Scanner Central Admin. Customers that want to use Scanner Central Admin, but have a scanner model which does not come bundled with the software, must download "Ft9l18gX1_R.exe" and install Scanner Central Admin Agent.

Version 9.21.1600
[Download] Ft9l18gX1.exe (size: 58.1MB)
Version 9.21.1600(R) (With Scanner Central Admin Agent)
[Download] Ft9l18gX1_R.exe (size: 63.1MB)

Download file has been a self-extracting format.


By executing the downloaded "Ft9l18gX1.exe" or "Ft9l18gX1_R.exe" file, program will be extracted in the same directory where the file exists. In case there is an existing driver, uninstall it before executing the file. Execute the "Setup.exe" in the created "¥Disk1" directory to start the driver installation.

For driver installation, please follow the Installation Guide. The functions and operation of the driver are in the "User's Guide (2.39 MB )" (size: 2.4MB) or "TWAIN driver help". (The "User's Guide", requires Adobe® Reader® 5.0 or later. ) If necessary, you can download it from: http://www.adobe.com icon-newwindow


How to install Scanner Central Admin Agent

  1. Double-click the downloaded "Ft9l18gX1_R.exe" file. This creates a directory called "\SCAAgent."
  2. Open that directory and double-click the "Setup.exe" to start the installation.
  3. Refer to Scanner Central Admin User's Guide for the further details on how to install “Scanner Central Admin Agent Update.”

Note:
This driver can be used only with the supported scanner models. This update is not required if there is no problem in your operating environment. Before installation, please log in as administrator first.


For technical inquiries, please contact the seller where you purchased the scanner.