Fujitsu MO drive utility software for Windows 95/98/98SE/Me
MO Drivers & Formatter for Windows 95/98/Me Version 6.03
USB Mass Storage Class Driver for Windows 98 Version 1.03
Summary
This package supports the following configurations.
| SCSI/ATAPI | USB | IEEE1394 | |
| Windows 95 | Yes | No | No |
|---|---|---|---|
| Windows 98 | Yes | Yes | No |
| Windows 98SE/Me | Yes | Yes | Yes |
This package includes the MO device driver and MO disk formatter (FAT16/FAT32) for Windows 95/98/98SE/Me.
This package includes the USB Mass Storage Class Driver for Windows 98/98SE and the MO supplement device driver for Windows
98/98SE/Me.
The USB mass storage class driver is the interface driver for the USB MO drive.
[Important]
Install the USB driver first BEFORE inserting the USB cable for the first time. If you connect the USB cable first and
the hardware wizard has started, click "Cancel" to exit and then install the USB driver.
This MO Supplement allows you to use your MO drive with current MO disks like the 640MB, 1.3GB and 2.3GB disks which have 2048 byte sectors, as well as the older 128MB, 230MB and 540MB ones which have 512 bytes per sector.
Installation
- Create a work folder (such as C:\temp\mo) on your hard disk to download the file to.
- Download the file (file name: w9x.exe) to the work folder.
- Double click the file (w9x.exe) to extract it.
- After that, a sub folder "Win9x" is created. All folders and files are extracted to this folder.
- [For USB MO drive]
Double click the Setup icon within the root folder.
[For SCSI/ATAPI/IEEE1394 MO drive]
(1) Open the "MODF" folder.
(2) Double click the Setup icon. - After installation is completed, restart Windows.
Usage Notes and Notices
- This software is especially made for PC/AT and PC/AT compatible machines.
- This software can be used free of charge. However, there is no support service.
- This product is protected by copyright law.
- Copyright of this product belongs to Fujitsu Limited.
- You may not modify, duplicate, disassemble or recompile this software/utility, either wholly or in part.
- You may make one copy of the software in machine-readable form for backup purposes only. The backup copy must include all copyright information contained on the original.
- The contents of the manual and specifications of the software contained in the package are subject to change without prior notice.
- Redistribution of this software/utility, either wholly or in part, without the express consent of Fujitsu Limited is prohibited.
- Fujitsu assumes no direct or indirect responsibility for damages occurring during use of this software or inability to use the software, under any circumstances.
Download "win9x.exe" [5,154,909 bytes]
