Hard Disk Driver 2.2
"Hard Disk Driver 2.2" is a Disk Array System driver.
When using Multipath Disk Control Software, it cannot use in this Hard Disk Driver.Please use the driver stored in Multipath
Disk Control Software.
| Updated |
| Hard Disk Driver 2.2 (patchlevel 05) |
June 3, 2004 |
Be sure to confirm the installed operating environment before using this driver.
| Operating Environment |
Hardware |
 Server Model
- PRIMEPOWER
- GP7000F family
|
System Requirements
- Solaris 2.6 (Hardware Release 5/98 or later release)
- Solaris 7 (5/99 or later release)
- Solaris 8
- Solaris 9 (Notes)
|
Disk Array System
- Disk Array System
(GP-DxxSxx)
- Disk Array System
(GP-DxxFxx)
- Disk Array System
(GP-DxCKxx, GP-DxRxxx)
- Disk Array System
(PW-D500B1,PW-D500C1,PW-D5L1A1)
|
a : A combination does not exist
b : Hard Disk Driver correspondence.
| single host |
SBus |
a |
a |
| PCI |
b |
b |
| multi-host |
SBus |
a |
a |
| PCI |
b |
b |
* When you connect by the Fibre Channel of the SBus environment, please ask the disk array equipment which can be supported.
The following driver manuals provide information on functions, revisions and upgrades.
- About a Multipath Disk Control Software
When using Multipath Disk Control Software, it cannot use in this Hard Disk Driver. Please use the driver stored in Multipath
Disk Control Software.
- Precautions when using Solaris 9
Solaris 9 cannot be used in the attachment Hard Disk Driver of Disk Array System. Get the Driver from [ Download ] below.
Please be sure (hddvpkgadd) to use it and install.
- Installation
To install the driver, use the installer ( hddvpkgadd ) which is included in the driver package. Do not use the pkgadd (1M)
command.
Before downloading and installing the driver ensure you have read and understood the notes and operating environment.
Operating Environment
