Hard Disk Driver 10.0.4
"Hard Disk Driver 10.0.4" is a Disk Array System driver.
When using Multipath Disk Control Software, it cannot use in this Hard Disk Driver.Please use the driver stored in Multipath
Disk Control Software.
| Updated |
| Hard Disk Driver 10.0.4 |
October 25 , 2006 |
Be sure to confirm the installed operating environment before using this driver.
| Operating Environment |
Hardware |
 Server Model
- PRIMEPOWER
- GP7000F family
|
System Requirements
- Solaris 2.6 (Hardware Release 5/98 or later release)
- Solaris 7 (5/99 or later release)
- Solaris 8
- Solaris 9 (Notes)
|
Disk Array System
- ETERNUS8000
- ETERNUS4000
- ETERNUS6000
- ETERNUS3000
- GR710 Disk Array System (GR71xxxU)
- GR720 Disk Array System (GR72xxxU)
- GR730 Disk Array System (GR73xxxU)
- GR740 Disk Array System (GR74xxxU)
- GR820 Disk Array System (GR82xxxU)
- GR840 Disk Array System (GR84xxxU)
|
a : A combination does not exist
b : Hard Disk Driver correspondence.
| single host |
SBus |
a |
a |
| PCI |
b |
b |
| multi-host |
SBus |
a |
a |
| PCI |
b |
b |
* When you connect by the Fibre Channel of the SBus environment, please ask the disk array equipment which can be supported.
The following driver manuals provide information on functions, revisions and upgrades.
- About a Multipath Disk Control Software
When using Multipath Disk Control Software, it cannot use in this Hard Disk Driver. Please use the driver stored in Multipath
Disk Control Software.
- Installation
To install the driver, use the installer ( hddvpkgadd ) which is included in the driver package. Do not use the pkgadd (1M)
command.
Before downloading and installing the driver ensure you have read and understood the notes and operating environment.
Operating Environment
