Skip to main content

Fujitsu

Global

ScanSnap N1800 Software Update

Applied Model and Software Revision

Note:
Please check the information below before downloading "ScanSnap N1800 Software Update".

Applied Model and Software Revision
Scanner Model ScanSnap N1800
System Version Older than ss001 01.07.01.0003
Network Scanner Admin Tool Older than 02.04.0005
Network Scanner User Editor Older than 01.02.0002

Change Notes

[System Software Update]

New Features and Improved Points:

  • Microsoft® security patches released before the end of October 2013 are included.
  • Improved the scanning performance, especially the performance of B&W or Grayscale image processing.

Fixed Malfunctions:

  • Fixed the defect that the user may not receive the warning or error messages immediately when it occurs during the operation.

[Network Scanner Admin Tool]

New Features and Improved Points:

  • Windows® 8.1 / Windows Server® 2012 R2 are supported.

Fixed Malfunctions:

  • There were cases where the Network Scanner Admin Tool does not display anything.

[Network Scanner User Editor]

New Features and Improved Points:

  • Windows® 8.1 / Windows Server® 2012 R2 are supported.
  • Windows® 8 / Windows Server® 2012 are supported.

Software change history

Note:
The following malfunction might occur in system revision ss001 01.01.01.0073 or earlier; however, it has been resolved in the system revision ss001 01.01.01.0074.

  • The N1800 fails to start up and the Windows login box appears instead of the N1800 login box.

If the system revision is ss001 01.01.01.0073 or earlier, it is best to apply system update ss001 01.02.01.0010, because if this issue happens there is a high probability that the N1800's pre-installed system software is damaged.

Download

Download the software / update to your hard disk by clicking the link below. Use the file size described below as reference for the required hard disk space.

Download
Download File File Size
System Software Update nsss001_0107010003.exe 297MB
Network Scanner Admin Tool nsss001_AdminTool_02040005.exe 18.5MB
Network Scanner User Editor nsss001_UserEditor_01020002.exe 12.8MB

About Scanner Central Admin

Scanner Central Admin is a suite of software designed for centralized management of fi Series scanners and ScanSnap N1800 scanners connected over a network, providing features like collective status monitoring and updating (drivers, firmware, applications, etc.). Please visit the Scanner Central Admin Software webpage for more details.

Installation Procedures

[System Software Update]

  1. Download and double-click the System Software Update executable. This creates the update file "ss001_0107010003" on the hard disk.
  2. Install the update file via Network Scanner Admin Tool or Central Admin Console. Instructions on how to install the update are available from the following sources

Note:
Depending on the system revision of scanner models, some versions of Internet Explorer (hereinafter referred to as IE) cannot be used on the computer when installing the update software.

Download
System Version IE8 / IE7 / IE6 IE 9 IE 10 / IE 11
ss001 01.01.01.0062 or earlier Supported Unsupported(*1) Unsupported(*1)
ss001 01.02.02.0001 or earlier Supported Supported Unsupported(*2)
ss001 01.06.01.0005 or later Supported Supported Supported

*1 For example, you cannot connect the scanner whose system revision is ss001 01.01.01.0062 from the computer that IE9, IE10 or IE11 has been installed on. As “Supported” shows in the above table, connect from the computer that the supported IE has been installed on, such as IE6, IE7, and IE8.
*2 For example, you cannot connect the scanner whose system revision is ss001 01.02.02.0001 from the computer that IE10 or IE11 has been installed on. As “Supported” shows in the above table, connect from the computer that the supported IE has been installed on, such as IE6, IE7, IE 8 and IE9.

[Network Scanner Admin Tool]

  1. Download and double-click the Network Scanner Admin Tool executable. This creates a series of folders, one for each supported language, on the hard disk.
  2. Open the folder that matches your language and double-click the file "fi-AdminTool.msi" to install the program. If your language is not supported, install the English version of the program which is located in the folder "en". Details about Network Scanner Admin Tool is available from the following source ScanSnap N1800 Network Scanner Operator's Guide

[Network Scanner User Editor]

  1. Download and double-click the Network Scanner User Editor executable. This creates a series of folders, one for each supported language, on the hard disk.
  2. Open the folder that matches your language and double-click the file "UserEditorInstall.msi" to install the program. If your language is not supported, install the English version of the program which is located in the folder "en". Details about Network Scanner User Editor is available from the following source ScanSnap N1800 Network Scanner Operator's Guide