Home >
Support & Downloads >
Computing Products >
Peripherals >
Image Scanners >
fi-Series FAQ >
Introduction of FAQ when purchasing FUJITSU Image Scanner fi-Series.

Before you buy -QA11-

Q11.	What type of SCSI connector should be used?

A11.	The available SCSI connectors are as follows.

Model	Connector type	Terminator
fi-5900C [Note1] fi-4990C fi-4860C2 fi-4860C	Shield type 68 pins	Equipped
M4099D fi-5750C [Note2] fi-5650C [Note2] fi-4750L fi-4750C M4097D fi-4640S fi-5530C fi-4530C [Note2] fi-4340C fi-5220C fi-4220C2 [Note2] fi-4220C [Note2] fi-5120C fi-4120C2 [Note2] fi-4120C [Note2] M3092DC M3091DC fi-5015C	Shield type half pitch 50 pins	Equipped
M3096GX M3093DG M3093GX	Amphenol full pitch 50 pins	Attached

Note: Please do not use fi-4990C with other SCSI devices on the same bus.

For your information:

Model	Connector type
fi-5750C [Note2] fi-5650C [Note2]	RJ45 （10BaseT, 100BaseTX）
fi-5900C [Note1] fi-5530C fi-4530C [Note2] fi-5220C fi-4220C2 [Note2] fi-5120C fi-4120C2 [Note2] fi-5110C	Type B (USB2.0/USB1.1)
fi-4220C [Note3] fi-4120C [Note3] fi-4110CU fi-4010CU	Type B (USB1.1)

Note

fi-5900C is a dual interface scanner with Ultra-Wide SCSI & USB2.0/USB1.1.
(Please note that SCSI and USB cannot be used at the same time.)
fi-4530C is a dual interface scanner with UltraSCSI & USB2.0/USB1.1.
(Please note that SCSI and USB cannot be used at the same time.)
fi-4220C/fi-4120C is a dual interface scanner with SCSI-2 & USB1.1.
(Please note that SCSI and USB cannot be used at the same time.)