Skip to main content

Archived content

NOTE: this is an archived page and the content is likely to be out of date.

FUJITSU TWAIN32 Version 6.6a

Device drivers, included in the TWAIN Toolkit are downloadable from this page.

Supported Scanner Models

  • M3099GH
  • M3099GX
  • M3099G
  • M3097DG
  • M3097G

OS

  • Microsoft® Windows® 98
  • Microsoft® Windows® 2000 Professional
  • Microsoft® Windows® Millennium Edition (M3097DG Only)

[Note]
When you use the device driver software above, appropriate ASPI manager software for your SCSI board is needed. Please ask the manufacturer of your SCSI board for the ASPI manager software.

Before Downloading - Software License Agreement Required

Before downloading this software, it is required that you accept the terms of the Software license agreement. Read the" terms of the Software license agreement " carefully. By downloading this driver software, you are deemed to have accepted this agreement.
* The driver installation method has changed. Please refer to the following installation procedure.

Driver download and installation

  • Ensure there is adequate hard-disk space.
  • Download the driver to your hard disk by clicking the "Download" link below.
Version 6.6a Disk space
[Download] FT66a1w3a.exe (size: 4.43MB) 10Mbyte
  • Extract the downloaded archive file.
  • For example, execute the following command, and extract the file to your hard disk.

C:¥>[drive:][¥path][¥filename]
  • [drive:] is the drive name where the downloaded file is stored
  • [¥path] is the pass name where the downloaded file is stored.
  • [¥filename] is the file name to be downloaded.

In case the existing driver still remains, after you uninstall it and execute the following command, please install the downloaded driver.

C:¥>[drive:][¥path]¥Disk1¥Setup.exe


The functions and operation of the driver are in the "User's Guide (4.15 MB )" or "TWAIN driver help". (The "User's Guide", requires Adobe ® Acrobat ® Reader 5.0 or later. If necessary, you can download it from: http://www.adobe.com.

Install the driver software in accordance with the following notes and methods.

  1. Please check if the scanner works correctly after install the Interface Adapter (SCSI-2).
  2. Connect the Image scanner device and put the power on in order of scanner, PC.
    If the PC detects that the Image Scanner is connected at the start-up time, the dialogue "Welcome to the Found New Hardware Wizard" is appeared on the screen. Then specify the following file that is included in the directory extracted above, and install the mini-port driver.
    For Windows® 98, Windows® Me
    Win98¥fjscmusd.inf
    For Windows® 2000
    Win2k¥fjscmnt.inf
  3. Then start-up the setup\install.exe that is included in the directory extracted above, and install it according to the instruction on the screen.

For Windows® 98 / Windows® Me user

At start-up time of the OS, if the dialogue "Unknown device is found" appeared on the screen, press "Next" and close that dialogue. The device is registered as an "Unknown device" but it is able to use with no problem. If the driver version 6 is installed in your device, the scanner is registered as an Image scanner device.

For Windows® 2000 Professional Edition user

Make sure to log in from the authority of administrator, and then start the installation. At start-up time of the OS, if the dialogue "Unknown device is found" appeared on the screen, press "Next" and close that dialogue. The device is registered as an "Unknown device" but it is able to use with no problem. If the driver version 6 is installed in your device, the scanner is registered as an Image scanner device.

For any technical inquiries, please contact the location where you obtained the model.